CH Flow isolation replacement

[Brean]

Hi Out there,

Worcester 24CDi

I have got the new one and it lookes like the valve just pulls out , have tried but don't want to damage anything , or do I have to remove the back plate and if so do I have to remove all of the valves?

Thanks

 

[Andygasman2010]

Firstly, this job with be a NIGHTMARE! They're far from straight forward. You'll need to take the boiler off the wall or at the very least disconnecting all other isolation cocks and pulling the bottom forward.

Also, either way you'll need flue or gas work so you'll have to get an RGI in i'm affraid. At least half a days labour.