Hi All,
I run a pub in Devon and have added some letting rooms. I thought rain showers would be a nice touch but soon found out that our existing cylinder wasn't up to the job so I am in the process of upgrading our hot water system. We currently have a Potterton Kingfisher ii CF 60 system boiler connected to a vented 175l cylinder.
The new set-up will be using, initially the same boiler ( I know the Kingfisher is past it's sell by date but need to spread the cost ), connected to 2 x 300l un-vented cylinders.
The questions I have are:
1, Can I pressurise a Potterton Kingfisher ii CF60 with an expansion vessel
2, Can a Kingfisher ii be used on an un-vented system
3, What would be the best way to control the 2 cylinders and radiators
The cylinders are everflow made by Kingspan and are system cylinders already piped and fitted with 2 way valves, 2 on each cylinder.
Any response would be most appreciated.
Ron.
I run a pub in Devon and have added some letting rooms. I thought rain showers would be a nice touch but soon found out that our existing cylinder wasn't up to the job so I am in the process of upgrading our hot water system. We currently have a Potterton Kingfisher ii CF 60 system boiler connected to a vented 175l cylinder.
The new set-up will be using, initially the same boiler ( I know the Kingfisher is past it's sell by date but need to spread the cost ), connected to 2 x 300l un-vented cylinders.
The questions I have are:
1, Can I pressurise a Potterton Kingfisher ii CF60 with an expansion vessel
2, Can a Kingfisher ii be used on an un-vented system
3, What would be the best way to control the 2 cylinders and radiators
The cylinders are everflow made by Kingspan and are system cylinders already piped and fitted with 2 way valves, 2 on each cylinder.
Any response would be most appreciated.
Ron.