I have seen a heating control that had sensors inside and outside the building, unfortunately I was not able to get much information about it at that time. If the building was to be used at 7:00 then the heating time switch was set to 7:00 and the system calculated when to switch on based on inside and outside temperatures.
My two questions are:
1. Who makes this sort of system?
2.. Can it be fitted to an existing system?
I am thinking that it would be a real cost saving for a church as the heating needs to be on for 24 hours in mid winter to get the building form cold to comfortable.
My two questions are:
1. Who makes this sort of system?
2.. Can it be fitted to an existing system?
I am thinking that it would be a real cost saving for a church as the heating needs to be on for 24 hours in mid winter to get the building form cold to comfortable.