Lofra Curva Oven CD96MFE bottom element replacement

[Happychappy4802]

Hi

I need to change the bottom element in the small oven on my Lofra cooker, but I cannot see how I can get access to the base to remove it, the electrical connections and two holding screws are accessed from behind the rear panel, but I cannot actually see the element or how to actually remove it, it must come out from inside the cavity, but it's how and what I need to remove which I am struggling with

Thanks

 

[PrenticeBoyofDerry]

A picture of the inside would be handy!Not an oven that I have worked on, but suspect there will be a cover plate inside the oven compartment that can be unscrewed to gain access the the element.

 

[Happychappy4802]

Hi, I will try and load a picture but I have had the door off and had a good look inside the oven cavity, there are no screws or clips, I can see the oven floor and where it fits at the front but it appears seamless with no way it could be lifted or separated, likewise the side panels have no further screws, I have taken the shelf runners off, but they do not reveal anything ? hence my hope that someone had actually changed one, I have emailed Lofra.it but they haven't responded for the past month ?