Salus RT500RF Programmable Room Stat Questions

[cabinscooter]

Mine is badged "Altech" and looks identical. Is it ?

 

[glasgowgas]

altecnic was a rebadged salus made for Grahams plumbers merchants

 

[gomez]

Leeds Plumber could you please email me your plain english instructions
for Salus Rt500rf because i find the manual difficult to understand
Many Thanks

[email protected]

 

[cabinscooter]

Leeds Plumber could you please email me your plain english instructions
for Salus Rt500rf because i find the manual difficult to understand
Many Thanks

[email protected]

Me too please

[email protected]

Thanks

 

[cor]

The reason the stat is coming on during the night/ always being on is setting number 5, there are 5 settings on the Salus

1 is the time you want heating on eg, 07.00 and set the temp (20)

2 is the time you want it to go off eg, 10.00 and set the temp (10 this will turn it off)

3 is the time to come on an evening eg. 17.00 and set the temp (20)

4 is the time you want it to go off eg, 23.00 and set the temp (10 this will turn it off)

5 the problem many people have is that they do not set number 5 correctly, this is a night/ frost stat and if you don't set the time and temperature same as 4 ie, 23.00 and 10*c then the heating will stay on.

I have had quite a few customers who struggle with the instructions so i typed it out in plain English as a word document and give it to them so its easier, if you want send me your e-mail address and i will mail it to you.

 

[martin93]

Ok, the thermostat is working fine.
I just plugged it to 220v and to the boilers loop in the wall.

Thank you

 

[kdh]

When changing settings from factory presets do i have to change the jumper positions.

1 is the time you want heating on eg, 07.00 and set the temp (20)

2 is the time you want it to go off eg, 10.00 and set the temp (10 this will turn it off)

3 is the time to come on an evening eg. 17.00 and set the temp (20)

4 is the time you want it to go off eg, 23.00 and set the temp (10 this will turn it off)

5 the problem many people have is that they do not set number 5 correctly, this is a night/ frost stat and if you don't set the time and temperature same as 4 ie, 23.00 and 10*c then the heating will stay on.

I have had quite a few customers who struggle with the instructions so i typed it out in plain English as a word document and give it to them so its easier, if you want send me your e-mail address and i will mail it to you.[/quote][/quote]

 

[clf-gas]

When changing settings from factory presets do i have to change the jumper positions.

No dont alter the dip switches, just alter the time and temps to that at which you want.

 

[kdh]

on the Salus

1 is the time you want heating on eg, 07.00 and set the temp (20)

2 is the time you want it to go off eg, 10.00 and set the temp (10 this will turn it off)

3 is the time to come on an evening eg. 17.00 and set the temp (20)

4 is the time you want it to go off eg, 23.00 and set the temp (10 this will turn it off)

5 the problem many people have is that they do not set number 5 correctly, this is a night/ frost stat and if you don't set the time and temperature same as 4 ie, 23.00 and 10*c then the heating will stay on.

I have had quite a few customers who struggle with the instructions so i typed it out in plain English as a word document and give it to them so its easier, if you want send me your e-mail address and i will mail it to you.[/quote] I would be greatful if you could e-mail me this word document, the instruction manual just dont make any sence kdh [email protected]

 

[neesh]

hello leedsplumber,

read your i m another one struggling with this salus heating system. could you please send me your typed instructons document on my email. woulb be greatest help. my email is '[email protected]' thank you so much.

The reason the stat is coming on during the night/ always being on is setting number 5, there are 5 settings on the Salus

1 is the time you want heating on eg, 07.00 and set the temp (20)

2 is the time you want it to go off eg, 10.00 and set the temp (10 this will turn it off)

3 is the time to come on an evening eg. 17.00 and set the temp (20)

4 is the time you want it to go off eg, 23.00 and set the temp (10 this will turn it off)

5 the problem many people have is that they do not set number 5 correctly, this is a night/ frost stat and if you don't set the time and temperature same as 4 ie, 23.00 and 10*c then the heating will stay on.

I have had quite a few customers who struggle with the instructions so i typed it out in plain English as a word document and give it to them so its easier, if you want send me your e-mail address and i will mail it to you.

 

[Skinnystick]

The reason the stat is coming on during the night/ always being on is setting number 5, there are 5 settings on the Salus

1 is the time you want heating on eg, 07.00 and set the temp (20)

2 is the time you want it to go off eg, 10.00 and set the temp (10 this will turn it off)

3 is the time to come on an evening eg. 17.00 and set the temp (20)

4 is the time you want it to go off eg, 23.00 and set the temp (10 this will turn it off)

5 the problem many people have is that they do not set number 5 correctly, this is a night/ frost stat and if you don't set the time and temperature same as 4 ie, 23.00 and 10*c then the heating will stay on.

I have had quite a few customers who struggle with the instructions so i typed it out in plain English as a word document and give it to them so its easier, if you want send me your e-mail address and i will mail it to you.

 

[SheilaBristol1]

The reason the stat is coming on during the night/ always being on is setting number 5, there are 5 settings on the Salus

1 is the time you want heating on eg, 07.00 and set the temp (20)

2 is the time you want it to go off eg, 10.00 and set the temp (10 this will turn it off)

3 is the time to come on an evening eg. 17.00 and set the temp (20)

4 is the time you want it to go off eg, 23.00 and set the temp (10 this will turn it off)

5 the problem many people have is that they do not set number 5 correctly, this is a night/ frost stat and if you don't set the time and temperature same as 4 ie, 23.00 and 10*c then the heating will stay on.

I have had quite a few customers who struggle with the instructions so i typed it out in plain English as a word document and give it to them so its easier, if you want send me your e-mail address and i will mail it to you.

Leeds Plumber can you please send the instructions to [email protected]

 

[dmca77]

Could someone email me the east instructions as I am having trouble understanding this.

Thanks in advance

[email protected]

 

[Gertrude]

multiple posts!

 

[Gertrude]

multiple posts!