Hiya, hope this is a simple question I'm making up a wiring harness to run a 12v sprayer off my 12v ride-on mower battery.
This is the sprayer pump:
http://www.ebay.co.uk/itm/120978611777?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1438.l2649
Max current draw on it is 7A.
I need to put an inline switch in the wiring harness, so I was wondering if something like this would do:
http://www.ebay.co.uk/itm/UK-IN-LIN...3001?pt=UK_Light_Fittings&hash=item3f25acac89
Does it matter that it is designed for 240v applications rather than 12v? Will I still need one that is rated at 7+A, or because the power is so much lower on a 12v system, can I get away with a 2A switch?
Many thanks for any replies
This is the sprayer pump:
http://www.ebay.co.uk/itm/120978611777?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1438.l2649
Max current draw on it is 7A.
I need to put an inline switch in the wiring harness, so I was wondering if something like this would do:
http://www.ebay.co.uk/itm/UK-IN-LIN...3001?pt=UK_Light_Fittings&hash=item3f25acac89
Does it matter that it is designed for 240v applications rather than 12v? Will I still need one that is rated at 7+A, or because the power is so much lower on a 12v system, can I get away with a 2A switch?
Many thanks for any replies
Links in this post may contain affiliate links for which DIYnot may be compensated.