W/B Combi 24LE

[Souljunkie]

Hi all

Managed to release the high pressure, thanks to nickso .

Alas the pressure is rising again, and it is leaking from
a brass thing that is between the fill tap and drain tap ?
appreciate all advise

 

[nickso]

to the right of the filling tap? could be a lot of things, they like a good leak do cdi's. diverter valve possibly.

 

[Souljunkie]

to the right of the filling tap? could be a lot of things, they like a good leak do cdi's. diverter valve possibly.

Ye, looking up at the drainage tap ?, what ya mentioned other day
there is a prety large brass valve sort of thing just to the laft
of that drain tap, i can see the water dripping out of this brass
thing, just want to know what to do next and what its called
i'm not shy of trying to do job.

 

[nogoodatfaultfinding]

I would check the expansion vessel as well mate.
One of the first things to check if your pressure is rising

 

[Souljunkie]

I would check the expansion vessel as well mate.
One of the first things to check if your pressure is rising

where do i locate that mate, lost bloody manual so need guiding
to everything...lol

 

[nogoodatfaultfinding]

In theory (dont know this model of the top of my head) it should be a big Red Circle shaped thing behing the boiler with a tyre air inlet on top.
This should be at at least 0.8 bar (tested with any regular tyre pressure tester) if not it needs to be repressurised