Indesit dishwasher D41 overflowing

Joined
18 Jul 2009
Messages
5
Reaction score
0
Location
Kent
Country
United Kingdom
Hair falling out...first light on my dishwasher kept flashing and no water was entering the machine, took the cold water valve to repair shop and he said it was knakered, ordered a new one, replaced still no joy, then some one advised me to tilt the machine forward, this was done half an hour ago..hey presto, machine filling up, however, it is now over filling and my kitchen is a swamp...please help
 
water in presure switch or pipe pulled off .found on the right hand side remove side panel .
 
no its ok just blow though it to clear the water ,then try it .
 
no its ok just blow though it to clear the water ,then try it .

Cheers gonna dry it out and try in the morning, so will let you know, can't let the misses mop up again after 3 times... fingers crossed
 
no its ok just blow though it to clear the water ,then try it .

Cheers gonna dry it out and try in the morning, so will let you know, can't let the misses mop up again after 3 times... fingers crossed

Hi have let it dry out, it's now filling up as per normal, but its not doing anything, eg arms not turning and when I put it to re-set I got 4 beeps?
Grr
 
if it dont spray circulation pump gone or could be very wet .try it after 24 hrs .water in the base has soaked it .
 

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.


Are you a trade or supplier? You can create your listing free at DIYnot Local

 
Back
Top