G
Goldspoon
Have fitted a 350L thermal store (happily sitting at 75 to 80 degrees). Although usually mains fed for DHW this one is fed from two very large header tanks. Before it was fed by a standard indirect cylinder (same header tanks).
So as far as the shower is concerned nothing should have changed. But the shower is running warm rather than hot. The incoming hot pipe of the mixer is very nice and hot so I presume it's just the mixer adding too much cold? But why?
Can I adjust something inside the shower mixer body maybe?
Any ideas?
So as far as the shower is concerned nothing should have changed. But the shower is running warm rather than hot. The incoming hot pipe of the mixer is very nice and hot so I presume it's just the mixer adding too much cold? But why?
Can I adjust something inside the shower mixer body maybe?
Any ideas?