bell 801 telephone entrance Wiring Help

[milne44]

hi, I need some help wiring up my new bell 801 telephone entrance phone.
i need to know what wires go were, it is the ZTORI diagram one.

i need to know where the coloured wires go , eg brown in to NTORI?

the wires i have coming out are , Brown , red , orange, blue , green.
just need to know what coloured wire go were?

many thanks keith

 

[jj4091]

http://www.tlc-direct.co.uk/Technical/DataSheets/Bell/912_Wiring.pdf

 

[matt1e]

hi, I need some help wiring up my new bell 801 telephone entrance phone.
i need to know what wires go were, it is the ZTORI diagram one.

i need to know where the coloured wires go , eg brown in to NTORI?

the wires i have coming out are , Brown , red , orange, blue , green.
just need to know what coloured wire go were?

many thanks keith

are you wiring the whole thing from scratch or just replacing the handset?
if the latter then just copy the old handset
different intallers use different colour schemes (and should be using twisted pair)

 

[milne44]

Just replacing the handset, I taking a photo of old wiring but I deleted it by mistake! So don't know what ones go were.

 

[matt1e]

do you have a multimeter?
if not then your best bets are
a) if you are in a residential block ask one of you neighbors if you can look at one of theirs, and copy that (terminal 1 may be a different colour core on your neighbors but the rest should corespond)
or
b) take off the door panel and copy T,0, and R then find the power supply and copy z and put the remaining core in 1

if your lucky it will be the same colours throughout
but I wouldn't bet on it ,You will probably need a meter

 

[mrmicco]

Did you every resolve this? What colours go where?

 

[sparkymarka]

Probably not

 

[csaba]

hi There
i need some help wiring the bell 801, the old handset is a entrotec
see pictures

7 wires to go

 

[sparkymarka]

You can't just replace any handset with any other type .... You may be able to get some functions to work but you may have , poor inwards speech / outwards speech / no buzzer / no lock release .... Why are you replacing the handset ?

 

[csaba]

You can't just replace any handset with any other type .... You may be able to get some functions to work but you may have , poor inwards speech / outwards speech / no buzzer / no lock release .... Why are you replacing the handset ?

the case is broken but it works properly, just thought ill get a new one

 

[sparkymarka]

In fact that looks like a ED4/4+ handset which will only work with the entrotec sytem you probably have anyway !

 

[csaba]

In fact that looks like a ED4/4+ handset which will only work with the entrotec sytem you probably have anyway !

so there is no way connecting the IROTZ 5 ports of bell to this, i have to get a compatible handset?

 

[sparkymarka]

Take it off the wall without taking out the wires , look on the back of the case it will tell you the model number, go to entrotec online you can order the correct replacement ...

 

[sparkymarka]

No you may damage the controller , I guess you live in a block of flats ! You don't want to get a large bill for its replacement !

 

[csaba]

just checked entrotec website, the bill would be £30 for the cheapest handset plus about £15 delivery
sure there isn't a way to connect the bell? i paid £20 for it and not sure if i can return it after unpacking and open it up to see the wiring