Blade runner

[peaps]

http://www.youtube.com/watch?v=nRqULdS9i6o

Used it for a while now, works well.

 

[stevethespreader]

http://www.youtube.com/watch?v=nRqULdS9i6o

Used it for a while now, works well.

i came across a bloke demonstrating it in b&q and i told him to show me his fastest cutting time on a peice of board and when he tried to do it fast it went all over the place, then i told him about one of the boarders i see out onsite who must cut hundreds of boards a day and i told him how fast he was, i watched from a distance as he used a tape measure and stanley blade to cut down one sheet of plasterboard into strips of around 5 cm a strip (holding the blade against the edge of the tape) , its the fastest ide ever seen anyone cut board he was like a machine, all the borders and tapers i know cut board this way, "BUT" where the blade runner comes into its own i think is where you can do curves with it

 

[peaps]

http://www.youtube.com/watch?v=nRqULdS9i6o

Used it for a while now, works well.

i came across a bloke demonstrating it in b&q and i told him to show me his fastest cutting time on a peice of board and when he tried to do it fast it went all over the place, then i told him about one of the boarders i see out onsite who must cut hundreds of boards a day and i told him how fast he was, i watched from a distance as he used a tape measure and stanley blade to cut down one sheet of plasterboard into strips of around 5 cm a strip (holding the blade against the edge of the tape) , its the fastest ide ever seen anyone cut board he was like a machine, all the borders and tapers i know cut board this way, "BUT" where the blade runner comes into its own i think is where you can do curves with it

I would like to see anyone cut and break a board as quick and clean. Not been around much if you haven't seen a bloke cut a board with a blade running it through with a tape, common practise.

 

[stevethespreader]

http://www.youtube.com/watch?v=nRqULdS9i6o

Used it for a while now, works well.

i came across a bloke demonstrating it in b&q and i told him to show me his fastest cutting time on a peice of board and when he tried to do it fast it went all over the place, then i told him about one of the boarders i see out onsite who must cut hundreds of boards a day and i told him how fast he was, i watched from a distance as he used a tape measure and stanley blade to cut down one sheet of plasterboard into strips of around 5 cm a strip (holding the blade against the edge of the tape) , its the fastest ide ever seen anyone cut board he was like a machine, all the borders and tapers i know cut board this way, "BUT" where the blade runner comes into its own i think is where you can do curves with it

I would like to see anyone cut and break a board as quick and clean. Not been around much if you haven't seen a bloke cut a board with a blade running it through with a tape, common practise.

if the blade runner was that good all the pro boarders would use them which they dont, good for diyers like yourself ,(or part timers) yes of course tape and blade is common practice i was just stating how fast the man was, these people cut hundreds of board a day if the runner was any good they would be using it , as ive said b4 peaps youve been stuck in the past for so long with your head up ur asre you wouldent have a clue about todays methods the faster you cut boards and get them on the wall, the more money you make
the more money you make

 

[peaps]

http://www.youtube.com/watch?v=nRqULdS9i6o

Used it for a while now, works well.

i came across a bloke demonstrating it in b&q and i told him to show me his fastest cutting time on a peice of board and when he tried to do it fast it went all over the place, then i told him about one of the boarders i see out onsite who must cut hundreds of boards a day and i told him how fast he was, i watched from a distance as he used a tape measure and stanley blade to cut down one sheet of plasterboard into strips of around 5 cm a strip (holding the blade against the edge of the tape) , its the fastest ide ever seen anyone cut board he was like a machine, all the borders and tapers i know cut board this way, "BUT" where the blade runner comes into its own i think is where you can do curves with it

I would like to see anyone cut and break a board as quick and clean. Not been around much if you haven't seen a bloke cut a board with a blade running it through with a tape, common practise.

if the blade runner was that good all the pro boarders would use them which they dont, good for diyers like yourself ,(or part timers) yes of course tape and blade is common practice i was just stating how fast the man was, these people cut hundreds of board a day if the runner was any good they would be using it , as ive said b4 peaps youve been stuck in the past for so long with your head up ur asre you wouldent have a clue about todays methods the faster you cut boards and get them on the wall, the more money you make
the more money you make

Like I have said, I would love to see anyone cut and break and board as clean or as quick.

You seem not to understand the concept of having to use your blade twice I use both methods by the way.

Update your site, looks like you haven't had work in a long time

One post you meet boarder and ask them if you can go see how it's done ( remembering you tell of having many qualifications collected over the year) then you go on to say ALL the boarders and tapers you know!!

Why would you need to see how it's done if you are trained so highly I ask myself

 

[stevethespreader]

http://www.youtube.com/watch?v=nRqULdS9i6o

Used it for a while now, works well.

i came across a bloke demonstrating it in b&q and i told him to show me his fastest cutting time on a peice of board and when he tried to do it fast it went all over the place, then i told him about one of the boarders i see out onsite who must cut hundreds of boards a day and i told him how fast he was, i watched from a distance as he used a tape measure and stanley blade to cut down one sheet of plasterboard into strips of around 5 cm a strip (holding the blade against the edge of the tape) , its the fastest ide ever seen anyone cut board he was like a machine, all the borders and tapers i know cut board this way, "BUT" where the blade runner comes into its own i think is where you can do curves with it

I would like to see anyone cut and break a board as quick and clean. Not been around much if you haven't seen a bloke cut a board with a blade running it through with a tape, common practise.

if the blade runner was that good all the pro boarders would use them which they dont, good for diyers like yourself ,(or part timers) yes of course tape and blade is common practice i was just stating how fast the man was, these people cut hundreds of board a day if the runner was any good they would be using it , as ive said b4 peaps youve been stuck in the past for so long with your head up ur asre you wouldent have a clue about todays methods the faster you cut boards and get them on the wall, the more money you make
the more money you make

Like I have said, I would love to see anyone cut and break and board as clean or as quick.

You seem not to understand the concept of having to use your blade twice I use both methods by the way.

Update your site, looks like you haven't had work in a long time

One post you meet boarder and ask them if you can go see how it's done ( remembering you tell of having many qualifications collected over the year) then you go on to say ALL the boarders and tapers you know!!

Why would you need to see how it's done if you are trained so highly I ask myself

your twisting words maybe its because you cant read i dont know, but i was observing him watching how fast he was, i never once asked to watch and the qualifications took 4 years not 1, you just stick to your lime plastering because theres nothing in my job that i do that you could tell or show me, go back to your house bashing

 

[stevethespreader]

[
Update your site, looks like you haven't had work in a long time

lol peaps i knew it was you, you visited my site from diy not the same day xblack signed up, through his name, everytime i get a visit it tells me, it tells me the refering site,also it tells me how long you have spent on my site and even what browser and operating system you are using, and also your service provider so just remember the next time you come snooping or spying i know you have visited

 

[peaps]

[
Update your site, looks like you haven't had work in a long time

lol peaps i knew it was you, you visited my site from diy not the same day xblack signed up, through his name, everytime i get a visit it tells me, it tells me the refering site,also it tells me how long you have spent on my site and even what browser and operating system you are using, so just remember the next time you come snooping or spying i know you have visited

Mmm, you need to understand how the system works. And no it doesn't work like that son. but yes we looked around your site for a laugh and a laugh we got. Thought the listed pub you worked on wasn't fire damaged? 75% down 35% up, and wait for it, didn't you say EH were involved..? I can bet you a small fortune they wasn't

P.S Just been on your google free site, tell me what it said this time

 

[peaps]

http://www.youtube.com/watch?v=nRqULdS9i6o

Used it for a while now, works well.

i came across a bloke demonstrating it in b&q and i told him to show me his fastest cutting time on a peice of board and when he tried to do it fast it went all over the place, then i told him about one of the boarders i see out onsite who must cut hundreds of boards a day and i told him how fast he was, i watched from a distance as he used a tape measure and stanley blade to cut down one sheet of plasterboard into strips of around 5 cm a strip (holding the blade against the edge of the tape) , its the fastest ide ever seen anyone cut board he was like a machine, all the borders and tapers i know cut board this way, "BUT" where the blade runner comes into its own i think is where you can do curves with it

I would like to see anyone cut and break a board as quick and clean. Not been around much if you haven't seen a bloke cut a board with a blade running it through with a tape, common practise.

if the blade runner was that good all the pro boarders would use them which they dont, good for diyers like yourself ,(or part timers) yes of course tape and blade is common practice i was just stating how fast the man was, these people cut hundreds of board a day if the runner was any good they would be using it , as ive said b4 peaps youve been stuck in the past for so long with your head up ur asre you wouldent have a clue about todays methods the faster you cut boards and get them on the wall, the more money you make
the more money you make

Like I have said, I would love to see anyone cut and break and board as clean or as quick.

You seem not to understand the concept of having to use your blade twice I use both methods by the way.

Update your site, looks like you haven't had work in a long time

One post you meet boarder and ask them if you can go see how it's done ( remembering you tell of having many qualifications collected over the year) then you go on to say ALL the boarders and tapers you know!!

Why would you need to see how it's done if you are trained so highly I ask myself

your twisting words maybe its because you cant read i dont know, but i was observing him watching how fast he was, i never once asked to watch and the qualifications took 4 years not 1, you just stick to your lime plastering because theres nothing in my job that i do that you could tell or show me, go back to your house bashing

You should remember what you posted a few months ago all about your "training" and how you came about it, you make me laugh

But back on subject.

Blade and tape, cut down one side, crak seem, spin to cut paper other side.

Blade runner, both sides are cut at same time depending how it set up.............

Will be renovating a 3 story listed farm house soon, want to have a bash..? Didn't think so.

 

[peaps]

if the blade runner was that good all the pro boarders would use them which they dont, good for diyers like yourself ,(or part timers) yes of course tape and blade is common practice i was just stating how fast the man was, these people cut hundreds of board a day if the runner was any good they would be using it , as ive said b4 peaps youve been stuck in the past for so long with your head up ur asre you wouldent have a clue about todays methods the faster you cut boards and get them on the wall, the more money you make
the more money you make

If you had done much boarding you would know why it's not used much on sites. You need a table for a start and not all use them to cut PB. It's not flexable enough to use for just cutting all day.

What it is good for is cutting when you have scribed your board, I do alot of it because contry to what you may think not all listed building work is lime render, many are getting planning to extend these days.....

Just something for you to think about.

 

[stevethespreader]

http://www.youtube.com/watch?v=nRqULdS9i6o

Used it for a while now, works well.

i came across a bloke demonstrating it in b&q and i told him to show me his fastest cutting time on a peice of board and when he tried to do it fast it went all over the place, then i told him about one of the boarders i see out onsite who must cut hundreds of boards a day and i told him how fast he was, i watched from a distance as he used a tape measure and stanley blade to cut down one sheet of plasterboard into strips of around 5 cm a strip (holding the blade against the edge of the tape) , its the fastest ide ever seen anyone cut board he was like a machine, all the borders and tapers i know cut board this way, "BUT" where the blade runner comes into its own i think is where you can do curves with it

I would like to see anyone cut and break a board as quick and clean. Not been around much if you haven't seen a bloke cut a board with a blade running it through with a tape, common practise.

if the blade runner was that good all the pro boarders would use them which they dont, good for diyers like yourself ,(or part timers) yes of course tape and blade is common practice i was just stating how fast the man was, these people cut hundreds of board a day if the runner was any good they would be using it , as ive said b4 peaps youve been stuck in the past for so long with your head up ur asre you wouldent have a clue about todays methods the faster you cut boards and get them on the wall, the more money you make
the more money you make

Like I have said, I would love to see anyone cut and break and board as clean or as quick.

You seem not to understand the concept of having to use your blade twice I use both methods by the way.

Update your site, looks like you haven't had work in a long time

One post you meet boarder and ask them if you can go see how it's done ( remembering you tell of having many qualifications collected over the year) then you go on to say ALL the boarders and tapers you know!!

Why would you need to see how it's done if you are trained so highly I ask myself

your twisting words maybe its because you cant read i dont know, but i was observing him watching how fast he was, i never once asked to watch and the qualifications took 4 years not 1, you just stick to your lime plastering because theres nothing in my job that i do that you could tell or show me, go back to your house bashing

You should remember what you posted a few months ago all about your "training" and how you came about it, you make me laugh

But back on subject.

Blade and tape, cut down one side, crak seem, spin to cut paper other side.

Blade runner, both sides are cut at same time depending how it set up.............

Will be renovating a 3 story listed farm house soon, want to have a bash..? Didn't think so.

ive been thinking about all the work and free lodgings you keep offering me ill send you my utr number and bank acount you stick 2 weeks wages in advance + fuel money and you got me ill come up and show you how to use a trowel because you cant use one £1500 should be enough to get me up there

 

[peaps]

http://www.youtube.com/watch?v=nRqULdS9i6o

Used it for a while now, works well.

i came across a bloke demonstrating it in b&q and i told him to show me his fastest cutting time on a peice of board and when he tried to do it fast it went all over the place, then i told him about one of the boarders i see out onsite who must cut hundreds of boards a day and i told him how fast he was, i watched from a distance as he used a tape measure and stanley blade to cut down one sheet of plasterboard into strips of around 5 cm a strip (holding the blade against the edge of the tape) , its the fastest ide ever seen anyone cut board he was like a machine, all the borders and tapers i know cut board this way, "BUT" where the blade runner comes into its own i think is where you can do curves with it

I would like to see anyone cut and break a board as quick and clean. Not been around much if you haven't seen a bloke cut a board with a blade running it through with a tape, common practise.

if the blade runner was that good all the pro boarders would use them which they dont, good for diyers like yourself ,(or part timers) yes of course tape and blade is common practice i was just stating how fast the man was, these people cut hundreds of board a day if the runner was any good they would be using it , as ive said b4 peaps youve been stuck in the past for so long with your head up ur asre you wouldent have a clue about todays methods the faster you cut boards and get them on the wall, the more money you make
the more money you make

Like I have said, I would love to see anyone cut and break and board as clean or as quick.

You seem not to understand the concept of having to use your blade twice I use both methods by the way.

Update your site, looks like you haven't had work in a long time

One post you meet boarder and ask them if you can go see how it's done ( remembering you tell of having many qualifications collected over the year) then you go on to say ALL the boarders and tapers you know!!

Why would you need to see how it's done if you are trained so highly I ask myself

your twisting words maybe its because you cant read i dont know, but i was observing him watching how fast he was, i never once asked to watch and the qualifications took 4 years not 1, you just stick to your lime plastering because theres nothing in my job that i do that you could tell or show me, go back to your house bashing

You should remember what you posted a few months ago all about your "training" and how you came about it, you make me laugh

But back on subject.

Blade and tape, cut down one side, crak seem, spin to cut paper other side.

Blade runner, both sides are cut at same time depending how it set up.............

Will be renovating a 3 story listed farm house soon, want to have a bash..? Didn't think so.

ive been thinking about all the work and free lodgings you keep offering me ill send you my utr number and bank acount you stick 2 weeks wages in advance + fuel money and you got me ill come up and show you how to use a trowel because you cant use one £1500 should be enough to get me up there

Another excuse

 

[stevethespreader]

P.S Just been on your google free site, tell me what it said this time

it said that your site has just been visited by the biggest **** on diy not

 

[peaps]

P.S Just been on your google free site, tell me what it said this time

it said that your site has just been visited by the biggest **** on diy not

You should learn to tell the difference between your visits and others..?

 

[stevethespreader]

P.S Just been on your google free site, tell me what it said this time

it said that your site has just been visited by the biggest **** on diy not

You should learn to tell the difference between your visits and others..?

quips are supposed to be spontaneous it took you a whole day for you to come up with this reply? ilmao