Nope, hence the question. The OP is now left none the wiser from your stupidity. It's not my fault.
Argh cant put anything on the wall
- Thread starter JamesAsus
- Start date
Nope, hence the question. The OP is now left none the wiser from your stupidity. It's not my fault.
It looks like I'm going to have to be very patient with you and explain in single syllable words.
Look for the question in the OP!
I've put it in bold and red in case you have difficulty recognising it! There is a clue, it has a question mark after it.
I suspect that the OP is a bit wiser now. He knows what a dopey plonker you are!
Additionally, you have no advice for the OP!
It looks like I'm going to have to be very patient with you and explain in single syllable words.
Look for the question in the OP
Does he or does he not want to hang something on the wall. Yes or no.??? simple stuff
How many more times! He knows how to do that, he doesn't need advice on that!It looks like I'm going to have to be very patient with you and explain in single syllable words.
Look for the question in the OP
Does he or does he not want to hang something on the wall. Yes or no.??? simple stuff
He obviously wants to know what's behind the plaster board!
Read the OP! The question was "How can i tell whats behind?"
It wasn't "how can I hang something on the wall?"
Answer the question if you want to be any help instead of exploiting the opportunity of making a fool of yourself!
Thank you, but although he's made a fool of himself, I wouldn't go so far as to call him an irritating prat.May I point in in the direction of " The most irritating pratt " post, you may want to make a nomination
No he doesn't. Think about it.
No idea what the other posts said, as some looked a bit ranty at you. So this is my own response. I bought a stud finder recently, a top quality Bosch one and I'm a bit disapointed with the results. I think it's becuase the plasterboard is foil-backed and so it detects metal everywhere... But you'll find it very useful to get a set of rare-earth magnets (very strong) in a small bag and hold the magnets losely and slide over the surface of your plaster board wall and you'll soon see where thee screws or nails into the stud work is. Clearly it doesn't work with dot & dab... When trying to find cables, keep in mind where the safe zones are supposed to be and that's where you should find cables.. but there are exceptions, so play it safe with your cable finder still. If you can, draw a decenent load through whichever cable you're trying to detect if that means temporarily swapping a lower power LED lamp with a high power incandescent one then do so.
Nozzle
Nozzle
It's not the first or only time that he's put something on the wall. He wants to know how to tell what's behind the plaster board each time he wants to put something on the wall!
Obviously you haven't given it much thought.
So he wants to put something on the wall then????
- Joined
- 7 Jan 2007
- Messages
- 8,831
- Reaction score
- 1,230
- Country
What the hell has it got to do with you !!!!! Only joking. Himagin sets himself up on a pedastle and he just needs to be knocked off it, he thinks he's superior when in fact he's inferior that's all.
Info I've posted is good for you're problem.
