- Joined
- 28 Apr 2004
- Messages
- 8,358
- Reaction score
- 963
- Country
Ken Bruce for PM
-
Looking for a smarter way to manage your heating this winter? We’ve been testing the new Aqara Radiator Thermostat W600 to see how quiet, accurate and easy it is to use around the home. Click here read our review.
7am - 8am, too early?
- Thread starter diy_fun_uk
- Start date
Re: Popmaster.
A mate at work has come up with an alternative scoring system for it.
I don't fully get it (neither does he, I think!); he does say that "it's a complicated algorithm"
It has come from our rolling-eyes at some of the "can't admit they're crap / froze" players, who, upon scraping three points, claim
"It was on the tip of my tongue"
"I knew that one" (after Ken gives the answer), and the classic
"I got thirty-three on his questions"
Last edited:
D
durhamplumber
Terry Wogan.Ray Moore.Liza Tarbuck.Johnny Walker...The Best.
She comes on at 5PM, after Steve Wright. I like her, she's down to earth and the craic is good
- Joined
- 25 Apr 2016
- Messages
- 2,818
- Reaction score
- 681
- Country
Can't abide that idiot who is on R2 in the afternoons.
+1
Which one would that be?
- Joined
- 9 May 2020
- Messages
- 7,393
- Reaction score
- 136
- Country
I can't abide the majority of DJs especially when there's more than one of them, and they're giggling among themselves.
After all that they couldn't install it!
Minimum clearance not met for distance between worktop and underside of wall units. 420mm. Mine are 420mm but with pelmet/trim brings it down to 395mm or thereabouts.
GREAT!!!
Minimum clearance not met for distance between worktop and underside of wall units. 420mm. Mine are 420mm but with pelmet/trim brings it down to 395mm or thereabouts.
GREAT!!!
After all that they couldn't install it!
Minimum clearance not met for distance between worktop and underside of wall units. 420mm. Mine are 420mm but with pelmet/trim brings it down to 395mm or thereabouts.
GREAT!!!
Karma, you idle wastrel
- Joined
- 25 Apr 2016
- Messages
- 2,818
- Reaction score
- 681
- Country
steve wright - idiot of the first order! Needs sacking.
Fooker has been milking it for decades.
He does the same show as he did on R1, just with edited jingles.
- Joined
- 9 May 2020
- Messages
- 7,393
- Reaction score
- 136
- Country
Your own fault for diverting this discussion into one about DJs.After all that they couldn't install it!
Minimum clearance not met for distance between worktop and underside of wall units. 420mm. Mine are 420mm but with pelmet/trim brings it down to 395mm or thereabouts.
GREAT!!!
After all that they couldn't install it!
Minimum clearance not met for distance between worktop and underside of wall units. 420mm. Mine are 420mm but with pelmet/trim brings it down to 395mm or thereabouts.
GREAT!!!
I would have quickly removed the pelmets. (Then put them back after they had gone)
You've no idea how much I'm kicking myself, checked distance to cooker hood, didn't think to check distance to wall units, doh!!!
Pelmets now off, installation rearranged
