- Joined
- 6 Mar 2020
- Messages
- 17
- Reaction score
- 0
- Country
I recently introduced a drayton wiser system to our upstairs circuit and that has been a great improvement. However, I am not sure if we are seeing boiler cycling as I have observed the boiler much more closely since making the change.
We have underfloor heating downstairs, radiators upstairs. The upstairs circuit is controlled by the wiser system.
A few months back we had the main heating pump replaced having noticed the upstairs heating was not working. The u/f heating has a separate pump so it appeared to continue working.
Watching the boiler this morning over a period of 20mins with a constant demand for heat from the u/f heating (no h/w, no upstairs demand) the boiler was only on for 445/1200s, with a typical pattern of 1m on, 2m off and repeat.
Is this typical behaviour for an older non-modulating boiler, it is an ideal classic se24ff?
TIA,
We have underfloor heating downstairs, radiators upstairs. The upstairs circuit is controlled by the wiser system.
A few months back we had the main heating pump replaced having noticed the upstairs heating was not working. The u/f heating has a separate pump so it appeared to continue working.
Watching the boiler this morning over a period of 20mins with a constant demand for heat from the u/f heating (no h/w, no upstairs demand) the boiler was only on for 445/1200s, with a typical pattern of 1m on, 2m off and repeat.
Is this typical behaviour for an older non-modulating boiler, it is an ideal classic se24ff?
TIA,