Do they make quality 1/4 inch bit holders?

[Safety First]

eBay and Amazon are full of the same pics of these 1/4 inch bit holders.
I bought a set and for a recent project and they have been really convenient. I got about 15 and have had all the bits I need on my tool belt. Very handy.

Though about 5 days in it turns out they are poor quality and are jamming/falling apart.

I have found a single piece by Makita that it's about £12 for one? ...or these cheap and nasty ones...(The characteristic black mini screw gate carabeener seems to come with them all).

Anyone found any that are good but not crazy prices?

 

[big-all]

do you mean a 6.35mm/1/4" hex[hex in hex out] screwdriver/drill bit click in fitment for a drill/drill driver??

 

[opps]

do you mean a 6.35mm/1/4" hex[hex in hex out] screwdriver/drill bit click in fitment for a drill/drill driver??

I think they mean these

https://www.amazon.co.uk/HiCOZZIE-Screwdriver-Extension-Keychain-Adapter/dp/B0CX8P4CG1?source=ps-sl-shoppingads-lpcontext&ref_=fplfs&psc=1&smid=A2BIW0BH68ZP39

They enable you to dangle your most used hex screwdriver bits from your tool belt. I have never used them.

 

[Safety First]

I think they mean these

https://www.amazon.co.uk/HiCOZZIE-Screwdriver-Extension-Keychain-Adapter/dp/B0CX8P4CG1?source=ps-sl-shoppingads-lpcontext&ref_=fplfs&psc=1&smid=A2BIW0BH68ZP39

They enable you to dangle your most used hex screwdriver bits from your tool belt. I have never used them.

Yes. Them.