- Joined
- 25 Sep 2019
- Messages
- 427
- Reaction score
- 13
- Country




Coming up to about 2 years I think or so. Left side ones are rusting as well.How old is the cabinet? Those soft close jobs do not last forever.

Certain type of hinge? Are these fine? Full overlay it saysYes, replace all four rather than just one.

Would you recommend me getting the ones you said then? Would this minimise rust compared to the ones I showed above?Stainless steel wouldn't rust if you can find some. These look the same pattern as you have already in place.
Stainless steel wouldn't rust if you can find some. These look the same pattern as you have already in place.

Understand where you are coming from. Preferably need it to be from amazon due to having prime etc. A product link to amazon would be appreciated.Not sure those really are stainless steel. The description says
Why coat SS?
- Material: made of high quality stainless steel with nickel plated surface for durability.
And the cost is a lot cheaper than other SS hinges
Eurofit Direct
Eurofit Direct supply a wide variety of stainless steel Concealed Hinges that are suitable for a range of hardware applications at the lowest prices online.www.eurofitdirect.co.uk
Understand where you are coming from. Preferably need it to be from amazon due to having prime etc. A product link to amazon would be appreciated.
Also not looking to spend extortionate amounts on hinges as I am on a budget but at the same time I am willing to spend a bit as its quality I am looking for and not having to constantly replace yearly!
It usually depends on what grade the S/S is. 316 marine grade tends to remain rust free.Incidentally stainless steel can rust, the clue in the name 'stains less'. Originally this type of steel was to be called rustless but testing proved otherwise, hence the stainless name.

That was the reason I suggested the ones that I did. Horse and water come to mind(Update)
Got the cabinet hinges that I linked on here from amazon. Was a total nightmare to put on and it wasn't the exact same, i didn't realise, there was only 2 slots for screws to screw onto the maim body.
My best bet would be to get the exact same make but finding it hard to get the DTC type ones.
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local