Push Fit onto Copper Pipes

[johnny2007]

I prefer the 12mm

 

[tmf786]

I prefer the 12mm

Got it, thanks.

 

[endecotp]

Only a 1/7th of the payment.

So, I asked him to redo all of the push fittings into copper.

He agreed.

I saw the ones in the floor and although not tidiest I've seen, they are not leaking.

He had already put plasterboard on the shower fittings and said he did them in the morning. In the evening just before he was about to leave he started applying bonding.

I was a bit suspicious as I didn't see any of the push fit lying on the floor as you might expect and I noticed some insulation between floor and wall in a gap.

I asked several times is it done and was assured.

So I took a risk and said I'm going to check and proceeded to take the screws out of the plasterboard which also took some of the bonding off.

I was right, he hadn't changed them. My next words:

!#*!!!!!#*!@!#!£!#!#!##!£!#

He'll come back today to redo them.

You’re mad to let him back on the premises after that, considering how little you’ve paid.

 

[tmf786]

You’re mad to let him back on the premises after that, considering how little you’ve paid.

I know.

He has apologised and is now calling or sending photos to me before sealing things up.

He's corrected the pipes and all copper now.

I'm hoping he's learnt from his mistake.

It's tricky, the bathroom is obviously stripped bare now coming up to end of December it's going to be hard to find a tradesman to pick up someone else's job but probably have to bite the bullet.