- Joined
- 27 Jan 2008
- Messages
- 28,179
- Reaction score
- 3,417
- Location
- Llanfair Caereinion, Nr Welshpool
- Country

Bread slicer would not work for my wife.
Tried it in another socket, still did not work.
So get my meters out. Socket loop impedance OK and shows 240 volts.
Plug in slicer, with switch off test cable with NCV tester, switch on and jumps from 1 to 4 bars, so seems likely fuse OK.
Press button on top, does not work, study the unit looking for some safety cut out.
Find a second switch so need to use two fingers to press both buttons so one hand at least out of the way of the blade.
I felt so daft, I blame my white hair, but wife has no excuse, she dies her hair.
Tried it in another socket, still did not work.
So get my meters out. Socket loop impedance OK and shows 240 volts.
Plug in slicer, with switch off test cable with NCV tester, switch on and jumps from 1 to 4 bars, so seems likely fuse OK.
Press button on top, does not work, study the unit looking for some safety cut out.
Find a second switch so need to use two fingers to press both buttons so one hand at least out of the way of the blade.
I felt so daft, I blame my white hair, but wife has no excuse, she dies her hair.