Recent content by access

How do I know if it's one or two part valve ?

When my water storage tank is filling I get a loud fog horn noise and a lot of pipe vibration. I think it is the ball cock in the cold water tank, can this be repaired or should I replace it ?

You don't state make and model but I would think it has to do with the hose going to the water pressure switch or the switch. with no make or model I cant advise where to locate these.

Could the washing machine and sink be mains feed and the other taps from your storage tank ?

Thanks corgiman, was able to find a converter when I knew what it stood for. 1MPa = 10Bar so the taps are for 0.5Bar to 10Bar, as I live in a bungalow with a gravity feed system I guess I will use a pump.

Got new taps for the bath and it states a water pressure of 0.05 - 1.0 MPa, is 1 MPa the same as 1 Bar ?

I am coating the walls and floor in a liquid membrane but I am worried about tiling to the wooden frame even though it will be sealed, it would seem that I need a flexible wall tile adhesive and that is something I have never seen ?

http://www.qvcuk.com/ukqic/qvcapp.aspx?app=detail&params=item^516809,navlist^516809*&walk=yah.ukGD&cmtags=

I have built a shower cubicle and the frame that the shower door fits in to is made of wood and the other 3 walls are plastered walls with the floor being concrete and a small wet room drain fitted. The frame is about 120mm wide on all four sides of the shower door with the bottom also forming a...

Looks like I'm not the only one stumped on this :shock:

I have a ceramic under basin that I want to fit under a granite worktop in my bathroom but I have no idea of how to fix it in place. The basin came with no fittings and I have never seen how one is fitted, can anyone help ?

I am putting the same tiles on my walls as I am on the floor in my ensuite this includes a shower room, I want the grout to be the same colour all over but cant find the same colour for walls and floors. The grout space is 4mm and I wanted to know if I can use THIS grout for the wals also ?

Hi, I have fitted a monsoon pump to both my hot and cold water system and am very happy with it. Only one thing concerns me, when the toilet is flushed the pump will run for about a 30 seconds or more after the cistern has filled, How is this and will it do any harm ?

I want to do the walls and floor of my ensuite with 330mm square ceramic tiles. I am in need of some advice. I want to run the joints on the floor and walls in line, so what size tile spacer should I use ? Is UniBond Rapid Set Ceramic Floor Tile Adhesive suitable to do both the floor and...

Many thanks, that's just what I needed.