Recent content by Akustik

Thanks, what was the cost for the installation you were charged?

Who do you talk to about assessing what size heaters are appropriate for the property? Electrician or ..?

Yeah, that's what I'm thinking too, but the heater you replaced are OLD. Mine are not that old, I think the flat was build in '82 and the heaters are not the original ones either, so they'd be 10-20 years old at most. Which is why I'm a bit hesitant, I don't know if the difference would be as...

I'm thinking about replacing my storage heaters with newer models as the old ones are not keeping the place warm enough and I end up needing to use an additional oil radiator during the day. This is turning out quite costly. So I'm looking at maybe switching to a newer model like the Dimplex...

The 9mm I've indicated on the picture does not account for the little flaps which also add thickness. I've contacted several companies which have sent me some samples and none of them have been thick enough except for one which was so thick I couldn't push it in. Can anyone suggest any companies...

My double glazing windows have huge gaps in the corners where the gaskets have shrunk and need to be replaced. The gap between the window and the frame is broad, so I'm having trouble finding a replacement gasket. The only one that's somewhat near the size I need is this one -...

Hi, I need to install a reverse osmosis system under my sink. It requires to drill and mount a waste water connection to the P trap. See images attached or video Relevant clip is at around 5:00. My P trap is different because of the washing machine and dishwasher waste hoses connecting to it...

Hi, I've been quoted for a job from a plumber and he's quoting me for a Main direct unvented hot water cylinder. Does anyone know if this brand is any good? The name makes it very hard to search for it online as it keeps returning results for "mains".

I have a Aqualisa Aquastream power shower that I want to replace with a mixer shower as I'm about to go with an unvented system. The only problem is, the pipes feeding into the power shower are 65 mm distance apart. Has anyone had any experience with a similar situation? Do they sell mixer...

@muggles Thanks for your answer. I don't know if the pipes come from above or below - the power shower was already installed when I moved in. That's a shame, I was hoping I could keep using it until I did a bathroom remodel.

I'm about to start the process of replacing my vented hot water tank with an unvented cylinder. Currently, I have a power shower installed (Aqualisa Aquastream). I've been told that I can't use that with an unvented cylinder. Would I be able to keep using it for a while if I simply unplug the...

Hi, I've recently purchased a one bedroom (all electric) flat and have quite a few questions about what to do with the current setup of the hot water installation. I mostly use the hot water for showering. I have a washing machine and a dishwasher which are self heating and storage heaters (and...

Sorry about that. Yes, it's a 1 bedroom flat.

I've got very limited space around the boiler, so I might have to call a plumber. I've only got electricity in the flat, no gas. The space is small, so I won't need a combi boiler. So I guess I'd go with a water tank again, unless there's something better - maybe something that heats up water...

What about the electric wiring? What does that do?