Recent content by alarmbenjy

He had a probe on some sort of meter he placed on the top of the burner/heat exchanger and said the gasket was still good.

Gas engineer opened boiler front (Worcester Bosch Greenstar 25i combi) condensation dripping from boiler casing roof inside and down the front of the casing on the inside. That much sweating/condensation that it runs out over the controls and drips from the two housing screws on the bottom of...

If anyone is still interested. I have Qualcast Suffolk Turbo 40SK same engine and body as the ATCO. Self propelled/electric start its about 30 years old been using it by pull start for most of that time after loosing battery charger and key years ago. Just bought a standard 12v 4.5ah sealed lead...

Just got to work out how I prove to the cover policy insurer that nothing is wrong so it doesn't affect our policy. They want prove of remedial works.

? 2 storey, bedrooms upstairs.

Do you mean those earth cables? The meter is approx 30cm away from the mains cable coming into the house and the distribution board.

Just had the annual boiler service and the engineers report has come from the cover company stating we need to have remedial work completed to prevent any potential claims in the future being declined on our policy. Remedial work required: double anaconda on the meter. I presume this means the...

I think that is the most reasonable explanation. When you look at the log why did the door supposedly open 12 times in 4 minutes...

Sorry I should have made that clearer. I have never had a resistor on the contacts. And the system worked fine for years, including systems I have fitted for family members. The old response panels worked for decades. But this Accenta Gen4 Panel worked well for 8 years until this problem. Would...

Yes I had tried linking the zone out and had no false alarms, the panel is very close to the door so the wiring to the contacts is about 2 metres and before these false alarms it had worked fine for some years. There is no tamper on the contacts they are just connected with the 2 wires to zone...

System log:- 205) SET PRGRAM 21:35:57 206) ENTRY START 13:11:46 Zone 1 207) ENTRY TIMEOUT 13:12:15 Zone 1 208) INTRUDER 13:12:51 Zone 1 209) INTRUDER 13:13:05 Zone 1 210) INTRUDER 13:13:07 Zone 1 211) INTRUDER 13:14:21 Zone 1 212) INTRUDER 13:14:27 Zone 1 213) INTRUDER 13:14:34 Zone 1 214)...

Shed has its own system. I had a heavy duty contact before this one and the same fault after about 1 years use. And before that the white plastic standard contacts were the same, replaced several times. I can't think of any alternative. Could it be the panel? I can understand having false alarms...

Pictures added thanks.