Recent content by albag

do you think my brother needs to get this looks at, would you recommend a different way of doing this, also is the 10mm cable from the internal CU to the external CU is a bit over the top,

Hi all Looking for clarification, my Brother has just moved house, in the garage he has 2 consumer units, one for the house and would appear one for external lights and power to the Garden, for the outdoor power there is 10mm armoured cable (approx. 35mtrs, all underground and inside a thick...

Guys just reading some of these post trying to find out if i need larger than 22mm gas supply to my new boiler, apart from a few feet of pipe and a couple of bends to get the pipe in to the floor space the run from gas supply to boiler is 43 feet, i assume its a given that i will need bigger...

Noseall Many thanks :lol: al

guys anyone have a comment ref this question al

Guys any advise welcome cheers al

can you lay a screed directly on to the thermal sheets (ecotherm) i am in the process of laying the floor in my extension, its an L shaped floor lay out from front to back its 45 feet 10 feet and side to side 18 feet by 10 feet, the original garage floor form part of the new extension, the...

what the max thickness for screed! can you lay directly on top of the thermal sheets al

All i have just had a concrete floor layed, how long will i need to leave this before i can lay the Kingspan thermal sheets and the top screed, al

SNM someone on here guided me to the site, www.sensor.co.uk, the guy at this company is very helpful, i purchased 4 controllers units and 5 sensor pads cost me £329, fairly expensive for just 2 bathrooms, but gives the wife the ability to turn the lights at the door and with an additional...

SNM my understanding is that the heated mirror pad only comes on when the LED's are switched on via the PIR, but will call Roper Rhodes customer service on monday to clarify, don't want the mirror heated 24/7 that crackers, the whole idea behind the purchase was to do away with visible...

Chri5 its an selv ip44 rated zone 2&3, instructions are pretty naff, 2.5 watts 220v/50h2 i have a separate lighting circuit from the CU for the 2 bathrooms, each bathroom as 4 35w LV down lights (proximity sensor switching behind tile) and extractor fan also operated by the sensor pad...

Cremeegg just read my post back, i have not explained this very well, its a mirror with LED's down each side, with an heated pad behind the mirror for de-misting controlled (ON & OFF) with a PIR,

Guys i was told by the manufacturer that as long you use the correct cement based adhesive you can DOT N DAB the aquapanel,