Recent content by allornothing

hi, I currently have a 2kw plug-in radiator plugged in and switched on for four or five hours a day. As this isn't a long-term solution I want to replace this with a wall-mounted convector heater (1.5kw) and just wanted to know if it is ok to turn the single socket I currently use into a...

thanks, regs always seem a bit of a minefield

thanks for the reply, when you say competent do you mean fully qualified electrician - or just diyer competent?

Hi A couple of questions in one, I want to change the very old centrifugal fan in my bathroom - which I had a look at once and is connected by ducting to a ventilation shaft that runs through my block of flats. First; just wanted to check - is it ok to replace the fan under part p, it sits...

there are three ring circuits, including one for night storage, but I'm not sure what specifically is on the other two, if it was on the same one as the kitchen it would include a couple of appliances and a washer. the other panel heater i have in at the moment is wired into the fused spur...

Hi I've replaced a storage heater in my flat with a panel heater, and wanted to add another which will be on the ring circuit. Will two 1.5kw heaters overload it or will it be ok to just use an existing socket (if i put in a switched fused spur). Thanks!