Thanks, I was getting confused with the Smart com, are any of the questions I listed handled by the Smart com?
Also, is the smart hub going to require the Smart com is installed already?
Hi, I fitted a texecom premier elite at home a couple of years ago and I'm interested in adding the smarthub. I've got a few questions though if anyone could help:
When upgrading the firmware to v4 will I lose my current settings?
Can I get free APNS notifications instead of charged SMS for my...
im currently redecorating and have just stained a (previously bare) wooden window ledge with dulux protective wood sheen light oak (solvent based). Before I started staining there was a small mark in the middle of the wood which I lightly sanded away, since staining the sanded area is now...
I've updated that but still the same isssue, I've checked my current phone bill charges and can see that all messages are being sent via the Vodafone number, but for some reason the 'send SMS' messages are the only ones I ever get, could be conincidence but seems unlikely. Not sure if there's...
The call centre numbers I'm using are 07785499993 and 07860980480. Is there a replacement for the number ending 0480, or should I just remove it from the config?
Cheers
Yeah have a filter fitted thanks, strange thing is that using the 'send SMS' option via the keypad it consistently works, but when intentionally triggering the alarm around the same time it consistently fails to send a text..
I fitted a texecom premier elite 24 with com2400 around 2 years ago, all was working fine and I was receiving text messages upon tamper alerts/alarms, recently I've noticed that I no longer get text upon the alarm going off.
However I sent a test SMS via the keypad and received it as expected...
I recently replaced my garage door with a roller, I'm now left with exposed brickwork where the wooden doorframe was. I considered using upvc to cover the brick but its uneven (some of the bricks stick out around 20mm) and so I reckon it would need boxed out with wood before covering with pvc...
Thanks, I just tried entering the engineer code which took me into the main menus, then pressed reset button but it didn't seem to change anything. If I don't stay logged in as the engineer then the keypad beeps regularly with the battery warning, also I can't set the alarm as due to the zone...
The alarms been working fine for around 1 month however today I got a battery warning for the external sounder (think I left it in learn mode for too long and ran the battery down - ricochet monitor told me it was low when I fitted it to the wall). I've temporarily disabled battery monitoring...
Thanks, all working now :D Last question... hopefully!
I've setup the com2400 and was initially getting sms messages upon every arm/disarm etc. I only want to get a sms when the alarm is set off by a sensor being triggered so within the Wintex Com section I've checked only:
- Alarms/Cancels...
Ok thanks, I'll wait until a warning appears on the keypad before replacing any batteries. Sorry to sound daft but what do you mean by 'firing the strobe' three times, does this mean making the external bell ring three times, can i do that via the bell test?
I saw the same phrase in the...