Recent content by AndyGarratt

Great, i'll give it a go today, already moved the stroke to a trigger as the trigger was not strong enough for the Engineer hold of so should be a simple change :) Thanks for your help as always!

Hi All, Do you know if its possible to flash the external strobe when the system is set using a Galaxy Flex 100? I do have the Trigger Module and considered setting a trigger on SET but would that would mean two connections to the SAB which I suspect would short each other? Cheers, Andy

Thanks mate, i'll take a look. Any idea where to download the latest firmware files for the RF RIO and Ethernet Interfaces? It seems like you can only get the panel firmware online. I have the RAMP unit for updating them. Cheers, Andy

Hi @GalaxyGuy Just to let you know this worked perfectly. Swapped Output2 to the Engineer and moved the Strobe to TR6 and it works a charm. Thanks for your help Andy

I don't think it's a figure they give, its and Invincibell, I'll give the strobe output a go though and let you know. Thanks for the suggestion! Andy

I should have added, connecting the hold off directly to 0v does work, just not when using the TR6, the Bell and Strobe triggers are connected to the outputs on the Trigger Module so the Trigger Module seems fine.

Hi All, I'm trying to get the Engineer Hold off to work on an External Bell Box with a Galaxy Flex 100. I have the external trigger module installed so I have some extra outputs and TR6 which was Spare is set to Engineer and Latch but it does not work. Any ideas? It seems the Engineer option...