Galaxy Flex flash Strobe on Set

Hi All,

Do you know if its possible to flash the external strobe when the system is set using a Galaxy Flex 100?

I do have the Trigger Module and considered setting a trigger on SET but would that would mean two connections to the SAB which I suspect would short each other?

Cheers, Andy

 

Program a set and configure for pulse. Yes, you can combine the outputs at the panel side if you like. They are open collector pulled up to 12v. Ie. join two trigger outputs if they have the current capability. One programmed as strobe and the other as set pulsed.

 

Just to add. If tying outputs, you may want to remove the pull up resistor links.

 

Great, i'll give it a go today, already moved the stroke to a trigger as the trigger was not strong enough for the Engineer hold of so should be a simple change

Thanks for your help as always!