Recent content by apl

Bought electrical door latch but before I fit it is there anything else I can check thanks for your help everyone

Thanks tried that I’ve also tested motor, pump & heater. I know some have mentioned the door latch is there anyway I can test this thanks

Hi just the programme lights as you turn the dial cheers

Hi I’ve tried that thanks it’s under the stairs so I’m going to have to pull it out tonight & have a look at it cheers

Hi I have a Bosch WAE24177UK/01 washing machine & tonight the fuse blew on the plug so I replaced it and also checked the drain plug for blockages and on trying to put the machine back on it was beeping twice and wouldn’t do anything, any help would be greatly appreciated thanks.

hi I am doing my house up & have cracks all over the rolled part of the ceiling and am wondering what’s the best way of repairing them also I have just had a re-wire & the walls need bonding but the ceiling sticks out from the wall & is there an easy way of sorting this, I have attached images...

Hi thanks for all your answers as there really helpful & the machine didn’t come with a viscosity cup cheers

Hi had some pre painted wooden skirts fitted which had been nailed in also the colour is more of an off white so I’m going to fill the nail holes & as I’m doing the house up I’ve bought a Wagner 150 paint sprayer & was thinking of spraying them. What’s the best paint to use to get a good finish...

Hi I have what I think are 1950’s tiles which I think are asbestos which I’m going to remove myself as it’s an unlicensed job but was wondering is there a chemical I can get to remove the bitumen like adhesive, any help is really appreciated cheers.

I was going to keep it the same unless you have any good ideas.

hi just moved into a new home & the fence at the side of the house has seen better days, it has 4x2 horizontal lengths top & bottom with 4 x 1/2 vertical slats running the length of the fence that attach to old concrete posts with coach bolts but we’re the 4 x2 attaches to the next length they...

Hi as far as I know nothing I only have four pir.

hi I’ve noticed when I’ve been coming home from work & when going to input my code into my remote panel by the front door after I’ve put my code in i have noticed zone 7 is flashing so I have to press reset to get rid of this. I have renewed the battery in the G3 panel in the loft on the advice...

Hi on reconnecting battery & with no power siren came on in bell box put mains back on & couldn't reset anything so had to disconnect battery,power down & wait for it to go off. In my manual it mentions putting a link in the G3 mini to reset the panel.