Is this what you've mentioned above Glenbirnie http://www.hilti.com/holcom/page/module/product/prca_rangedetail.jsf?&nodeId=-10144&selProdOid=8891...
I don't doubt you're right re the tool i'm thinking of, shame really, it can't be that difficult to make a 2 piece tool that can omit/detect a...
I work for a council mainly carrying out maintenance to tenants properties. There are occasions when we need to drill through walls but need to...
Postcrete is the easiest way, add it to the bucket and pour water on...if you'd rather knock some concrete up get a bag of ballast and a bag of...
I've heard this new fangled cement stuff is good for making boots with :D
I'm assuming the pipes have been made off properly and don't leak...? Just mix a small amount of sand and cement (5-1'ish) and fill the holes...
It looks like part of it has been over pointed at sometime before, i'm guessing it looks like a 5-1 mix. Looks a bit sandy for a standard 4-1 mix....
If you buy decent quality screws (box full) they will come with a screw driver bit in the box.
Did we come to the conclusion there was or wasn't a cavity? If there's no cavity then insulating the interior wall will help, but may move the...
Brick acid....
The first and very obvious problem is access to the top of the chimney, there may be some brave/daft soul with a long enough ladder but it looks...
Not being the sort to force my views on others i'll tread carefully. Joe, you are right it is condensation....but....why does the condensation...
Still sounds like cold bridging to me (sorry joe-90). I know there are still quite a few who dispute the existance of cold bridging being the...
If condensation was dripping off the window and down i suspect you would be able to follow the course of it past the bottom of the window and onto...
Separate names with a comma.
Visiting from the US? Why not try DIYnot.US instead? Click here to continue to DIYnot.US.Dismiss Notice
