screw driver bits

[CAESAR32]

Hey what number screwdriver bits are best for 10mm screws? Is it pz2 or pz3 also are the ph2 ones better for most screws? Thanks if anyone can explain.

 

[RonnyRaygun]

While people in the building forum probably could answer this question, you might have more luck in the carpentry forum

 

[r896neo]

do you mean 10mm diamter screws? If so they will take a big bit, at least a Pozi-3 probably a pozi-4.

Almost no common screws in the uk take phillips bits only drywall screws so invest in a set of pozi's if that's why your asking.

 

[Aqua]

If you buy decent quality screws (box full) they will come with a screw driver bit in the box.

 

[^woody^]

Hey this is crazy, but buy some bits and try them maybe

 

[maltaron]

I am a bit confused over 10mm screws. If they are 10mm diameter you will likely need a spanner. If they are 10mm long then a PZ1 will fit. Aa a general rule no. 4 screws need PZ1, no 6 to no 10 need PZ2 and no 12 upwards nneed PZ3 or may be hex head.