screwdriver bits

[CAESAR32]

Hey what number screwdriver bits are best for 10mm diameter screws? Is it pz2 or pz3 also are the ph2 ones better for most screws? Thanks if anyone can explain.

 

[cajar]

If the screw is a PZ2 then you use a PZ2 bit. 10mm (are you sure?) will be PZ3 if not a bolt head. philips are different bits and allow the bit to slip out under torque. Use the correct bit for the screw you're driving.

 

[CAESAR32]

So a 2inch 10 will need a pz3 bit to screw it in?

 

[HERTS P&D]

So a 2inch 10 will need a pz3 bit to screw it in?

You will need a pozi 2.

Andy

 

[CAESAR32]

Thanks

 

[cajar]

So a 2inch 10 will need a pz3 bit to screw it in?

You will need a pozi 2.

Andy

10mm diameter mate c'mon.

 

[HERTS P&D]

He said 2" - 10!

Andy