Recent content by atomic123

Hi Daz, Many thanks for the info. I went to b&q today and bought the "Sikadur Epoxy Repair Kit" Looks similar to the one you recommended.. Am going to give it a try tonight. Fingers crossed...

Hi All, Having carpet fitted in living room on Wednesday (its saturday night now). Just working on finishing off little bits and pieces and realised there are a few (maybe 4-5 ) holes in the concrete floor. :o The holes range from 10mm at deepest (but generally 3mm) and 75mm to 50mm...

HI, After all advice, we found a leak!! So drained and refilled the system, and this time rads filled immediately, no problem.. ;-) So that sounds to me like the feed pipe is not blocked.. ?? Chris

Hi All, Got the radiators filled.. but now the boiler will not ignite.. Its agloworm Flexicom hx... No fault codes, programmer is on, but the pump is not running.. Any ideas grstefully received! Chris

Hi, Thanks all for posts. Have now managed (with much persistence) to fill and bleed all downstairs and 1 upstairs rad. 2 upstairs rads left and they are going slow! ;-) I think it may be an air block? I am doing 1 rad at a time.... Looked into Cold feed and I don't 'think' its...

Hi , Hope someone can help. We have had the CH system drained for a few months. Have this weekend tried to refill with not much luck. :-( It is a gravity fed, pumped system. The F&E tank fills, but then not able to bleed radiators. Have managed to bleed a couple, but its not...

Hi, thanks for reply. But how do I pack it, (with foam filler? ) and how do you finish the right hand side , maybe a edging piece? christine

We have a 1900 terrace house. The airing cupboard frame was original and pretty damaged and painted. We are modernising the house, and have removed the frame. But now struggling to put one back which looks straight.... The original was the sort of frame which was stuck to the fornt of the...

Can you recommend anyone in the gosport area?

Do you know where these can be bought? and what bits would we be able to do.

Does the picture on this website help to show the problem? http://www.ptcorney.co.uk/reno.html The boiler is at the left when facing the house.

Can anyone explain to me the regulations for flues on a Potterton 50 Suprima Gravity Fed Boiler. Because of the nature of our house there are no windows one metre away from a surface. Therefore we have had to extend the flue by roughly one metre for it to comply with regulations. Whenever...