Recent content by Atoss

300 watts

Oops, I've updated the my post. Thanks

Just wondering, if anyone who has a solar iboost has connected a heated towel rail to 2nd out put ?. Apparently the 2nd output is for a 2nd immersion heater. I have emailed the company, unfortunately they have not replied TIA

Evohome system with an Ideal vogue max, 11 zones, 10 controlled with HR92, BDR91 2 port valve. HW with BDR91 2 post valve. The other zone has thermaskirt heating, controlled by DTR4 and relay, 2 port valve. I fitted the opentherm bridge, I removed the 2 port for the CH. It worked initially, but...

Evohome system with an Ideal vogue max, 11 zones, 10 controlled with HR92, BDR91 2 port valve. HW with BDR91 2 post valve. The other zone has thermaskirt heating, controlled by DTR4 and relay, 2 port valve. I fitted the opentherm bridge, I removed the 2 port for the CH. It worked initially, but...

Not in the controller, I'll try that too. Cheers

Batteries have all been replaced,

Just checked, my honeywell heating system works on the same 868 frequency, been installed now for a year, not sure why it could be causing issues now.

By the sounds of it, might be better having a wired system, previously had the vertitas 8 system for for about 15 years, never had any problems.

I replaced the batteries this morning, I'll do a walk test later, not sure why the rf jamming has suddenly appeared, not been an issue before. I had thought of just doing a factory reset and see what happens, bit of a pain though

System been fixed about 4 years, never had any issues. Just wondering if my control panel is at fault. Over last week, several problems. Tamper issues on several pirs and door contacts And low battery. Changed the batteries, and checked the tamper. Still alert with battery and tamper. I decided...

The link explains the evohome system perfectly, just need to fi d an installer.

Cheers for your reply

Having a new ideal boiler fitted soon, I was interested in having evohome system too. Engineer hasn't had any experience of the evohome. I know there would be a zone vavle for the hot water, but if I have the evohome trv's on the 10 radiators, from what I understand, I wouldn't need a zone valve...