Recent content by bazdaman

Could I possibly have a copy of the baxi pdfs, thanks [email protected]

It looks ridiculous

If open vented you can bung the system so you don't have to drain, if it's pressurised you won't have to drain

What boiler is in the property? A mm odern condensing boiler can rust very quickly, also did you have a gas safety check only recently or an annual service aswell?

What does it matter, you will have no choice in the set up they fit

Easy enough, isolate flow and return and crack the nut on the end of the return iso, the gauze is in there, check in the manual for detailed instructions and location

There is a gauze filter in the return isolation valve on the boiler

No clean the filter

Ok bet you have dragged some crap through the return filter

Zone off your existing heating system so you can use your existing boiler

Put a new filling loop on and charge vessel wolesley part no 440442 it's called a disconnector

I have registered boilers with Worcester as old as 8 years so I suggest you give them another call

Blocked plate forces heat down flow pipe

Does the temp display rise rapidly to 80c plus?

What colour was then replacement vessel?