bilabonic's latest activity

  • B
    bilabonic replied to the thread What foam gun?.
    Awesome. After years of using canned stuff with screw on plastic tubes this ses The way forward. Just got googled now what the end...
  • B
    bilabonic reacted to mrrusty's post in the thread What foam gun? with Thanks Thanks.
    With the gun I linked, I just scrape off anything around the nozzle, and sometimes give it a quick rub across the end with sandpaper or...
  • B
    bilabonic reacted to endecotp's post in the thread What foam gun? with Thanks Thanks.
    You can spray some of the acetone cleaner on the end of the nozzle to clean it. This may not be needed, if you scrape off the foam when...
  • B
    bilabonic replied to the thread What foam gun?.
    I'll be using it regularly For new door frames tbh. Plus any other holes I can find. But again the end of the nozzle where it exits...
  • B
    bilabonic reacted to endecotp's post in the thread What foam gun? with Thanks Thanks.
    Yeah. Unless you're not going to use if for a year or two.... which is the position I've found myself in. It does eventually gunge up...
  • B
    bilabonic reacted to 23vc's post in the thread What foam gun? with Thanks Thanks.
    This. never take can off unless immediately replacing it, never worry about purging/cleaning, easy
  • B
    bilabonic reacted to endecotp's post in the thread What foam gun? with Thanks Thanks.
    The liquid doesn't start to expand and harden until it has left the gun nozzle into the atmosphere. The liquid in the gun tube should...
  • B
    bilabonic replied to the thread What foam gun?.
    For years I've used cans but there is no control. I was even purchasing in bulk and most would go off. I had the cheapest Screwfix...
  • B
    bilabonic reacted to mrrusty's post in the thread What foam gun? with Thanks Thanks.
    It does - the brass thumbwheel behind the trigger, and that's what I do too
  • B
    bilabonic reacted to opps's post in the thread What foam gun? with Thanks Thanks.
    I purchased the partially teflon/PTFE Roughneck one. I have been happy with it. From memory it was less than £30. The full PTFE version...
  • B
    bilabonic reacted to ^woody^'s post in the thread What foam gun? with Thanks Thanks.
    I bought a cheap two gun set "Preciva" from amazon a few years ago expecting then not to last long based on other more expensive ones i...
  • B
    bilabonic reacted to stevie888's post in the thread What foam gun? with Thanks Thanks.
    I wavered for years about getting one only being diy but a fiull house refurb prompted me to get a roughneck from Toolstation. The only...
  • B
    bilabonic reacted to Wayners's post in the thread What foam gun? with Thanks Thanks.
    Just buy the £10 foam gun from B&Q. For the control. When can runs out I often blasted foam cleaner through then a new can of foam. I...
  • B
    bilabonic reacted to noseall's post in the thread What foam gun? with Thanks Thanks.
    As above. We use the disposable cans, rather than the gun as we use more low-ex adhesive stuff. However all the window fitters we work...
  • B
    bilabonic reacted to 23vc's post in the thread What foam gun? with Thanks Thanks.
    I’d say any gun has the ability to either self destruct or get clogged, so I’d just buy the usual basic screwfix ones. Think my current...
Show older items
Back
Top