Recent content by billybob150811

having an issue with peglar pressfit fitting has anyone sucessfully removed a fitting without cutting out the pipe work i dont have a clear space to cut the 15mm copper

i have a quote from a roofer to strip the old mineral felt, and plywood underneath it and fix new 18mm osb and fit 3 ply new felt today .a wet morning they turned up i am at work they put the osb over the old felt and ply could this cause an issue down the line or is this an industry norm in...

i intend to have my dormer bungalow flat roof above the bedroom re felted its less than 20m i did want the best capping sheet available so what should i ask for and and are there any obvious comments or questions i would prefer to pay a bit more for better quality as i dont think it will...

i have been asked what,s the difference between tmv3 and tmv2 as i don,t know i thought i,d ask

i intent to remove a torch on felt roof if theres any felt torched onto the wooden base. stuck on. apart from heat are there any other ways to remove the stuck on bits

i have a dormer roof approx 12m and would like it re-roofed with 3 ply torch on this seems a good idea in my location as there are good local tradesmen with experiance of ths material what would be a suitable capping as i want to go for a longer lasting solution or are there now better...

i have a multi meter and i put the two probes in the water about 25mm apart i put it on ac as well but didnt get a reading

i put my hand in my pond and got a tingle [250mV dc] the only electrics on the pond is a live cable going to another pond has anyone got an explantion for this

it was mentioned here that a flat roof should have a 3 degree fall as this lets the weight of water fall under gravity i plan to get my dormer roof re-roofed .should i ask for this or is it unnecessary

need to get to grips with bms panel any good articles or books worth reading all aspects other than building its more an understanding

is there a noise issue with fibre glass

i bet this has been done to death here but hey ho advice sought from roofers as to the best material to re roof my 6m x 3m flat roof im 63 would like it to last my life time still working and in a position to pay for better stuff so lets not talk corner cutting at least to start with a lot of...

no immersions and heating source completly seperate so pin hole not possable

temp in cwst is 52oC its approx 20m above calorifier calorifier apprx 10 000 litre cwst approx 8000 litre pipe size 50mm no open vent could the heat in the cwst be a result of circulation within the supply pipe theres secondary returns and de strat pumps

a customer has asked if theres anywhere that does spares for the above showers i dont have any further info as i was actually servicing the boiler and had been told victoria plumb dont offer spares i dont really want to get involved as these have trouble written all over them