Recent content by bobbidill

Cheers

Thanks, I'll give a deeper back box a try and I'll check the signal strength at the weekend when I look at the log.

Cheers SecureIam. It was reported as a Supervision Fault on Texecom Connect last time it happened. The sensor is a Texecom Ricochet Micro Shock-W Shock Sensor.

The panel beeps once the door is fully open, until it's closed again, so the time period varies, depending upon how long the door is left fully ajar. I'll open the door fully later in the week and I'll time how long it takes before the panel starts to beep, it could be fifteen minutes, but I...

Thanks pcaouolte. We have a Texecom wireless PW-W sensor in the corner of the same wall of the room that the patio door is on, but the wall it's attached to is about a foot thick.

We have an Elite 64 panel, with a Texecom Micro Contact-W on our patio door. This works without issue...until we open the patio door fully. The door opens outwards, so the sensor moves further away from the panel and when we open the door fully the panel starts to beep because it has lost...

Thanks Gerrydelasel, do you think that siliconing every seam around the bar will solve the problem effectively?

After a lengthy hiatus, we've eventually gotten round to addressing this problem with the damp skirting. We'd established thanks to all your help that the damp is occurring because the shower enclosure is fixed directly to the wall which isn't tiled, when the enclosure should in fact be fixed to...

Ah, ok thanks secureiam, that explains it. I've installed the Texecom Connect and Texecom app and one of the sensors is showing on the mobile app with a purple icon, not green as all the others are. I haven't been able to find anything in the manual which describes what the different colours of...

Thanks 333rocky333, Varilight don't supply screw cap covers with their plates which are made of a white plastic material.

I'm hoping that someone here can point me in the right direction. I'd like to find screw cap covers which work with Varilight V-pro dimmer switch plates. Varilight don't make them and the BG Nexus screw cap covers are a little too big. It's a M3.5 screw. Any ideas please folks?

We've already had those installed thanks bobasd

We've got a HETAS registered guy coming round to certify the stove, so we'll see what he says. Thanks for the advice though

No, your condition is one which leads you to mock and belittle people online. How very brave.

It is indeed bobasd