Recent content by buzzy

Hi just a update on my problem. It's now been a Month since I fitted the replacement bell box battery and up to now I have had no Tamp faults or any false alarms . Looks promising Thanks to everybody for there help. Buzzy :D

Thanks for your help secureiam I wil leave alone for a period to see what happens.will update post after a longer test. Buzzy

Update info I recieved my replacement battery very quickly next day normal postage from Buyabattery co uk cheaper than eBay good service. Have now fitted battery and fuse in main control unit it didnt manage to blow my head off as I disconnected the siren wire before fitting battery. It now...

Iam now waiting for batery delivery and fuses hopefully tomorrow . In anticipation for tomorrow when I get the batery what would be the best procedure to fit these items at the moment I have got the system in engineer mode with covers off the bell box and control unit. I presume that if I fit...

Continuing story, took the control box cover off on investigation the bell/strobe fuse has blown . So just ordered a pack of 10 as advised by yourself probably a couple of days to get . i also now took the outside cover of the bell box not brilliant in there some signs of corrosion on tamper...

Assuming that the fuse has blown when I replace . And if it starts working again do you know how I stop the tamper circuit working on the bell box so I could then see if the tamper still keeps activating Iam just trying to diagnose what is causing this Tamper fault by disabling the tamper...

Will check fuses tomorrow , I can set the alarm by keypad if it then goes into alarm mode nothing is happening on bell box no sound or strobe but internal sounder on keypad works. If I go into engineering mode to do a strob test or outside bell test nothing happens also the light that used to...

Thanks for response . Previously I had taken a picture of the inside of bell box which had a label saying Volumatic Bs 4737. Date aug 1999 with a tell help number 0161 28 ? 5555 hard to see from photo . I don't have any written info about the box ,but Ido have the accenta manual from...

Hi everybody with reference to previose post from me still got problems. I still keep having the Tamper fault showing very intermittent sometimes also at night . If I just enter usser code and reset problem cured till the next time as this is getting to be a pain having to get out of bed in the...

Thanks for response to post So what you are saying is to input engineer code will stop alarm going off before I lift cover???. Does this also apply if I have to remove cover on outside to check battery. If the alarm goes off on removing cover do I use my code or engineer code Sorry if Iam...

Hi can anybody help please I have a Accenta 8 alarm system and Iam getting very intermittent Tamper alarms displayed having to input my user code and pressing reset to stop the low sounder /strobe. Can any body advise me do I have to input the usser code or the engineers code before I take off...

Sorry to say I have to leave forum till tomorow Wife giving me grief thanks everybody. buzzy

Would these full bore lever valves be obtainable from your local B&Q store. buzzy

Thanks for all your inputs everybody . The pipes are above floor level. Can you get these full bore valves at the local plumbing outlet in England ?? as I have only seen the ones that have a ball valve inside & the plastic Push on ??

Iam new to the site so if Iam in the wrong part could you please point me in the right direction , or if this Question has previosly been discused could you also give me the Link. My Question to you tech guys is can I fit Isolator valves in the Feed & Return to a Double Radiator ( the ones...