Recent content by CarbolicSmokeBall

Thank you. Really helpful! I will give it a try and then update. Cheers.

Thanks Sparky. Sorry, would you also mind dumbing it down a little for me please re the 0v and what to do with the keypad! Cheers.

Hi Secureiam, Thank you for this. Is there any chance you could please dumb it down for me? Re the manipulation of the wire in the keypad. Yes the siren was still ringing even when unset.

Hello all, I recently posted about a power fault to the keypad. After a couple of weeks figured the black wire was not working between the keypad and the alarm panel. That thread can be found here...... https://www.diynot.com/diy/threads/unusual-accenta-g4-honeywell-fault-keypad.555738/ I...

Thank you to Sparkymania and Handymanjo for their suggestions. I bought a multimeter and carried out a continuity test on each of the 6 wires between the keypay and the alarm box. Turns out the black wire has no power. I have got around this by using the blue wire (Speaker) wire as the black...

Bought a volt meter today. It will be mid week. Will test it then and post. Thanks for the suggestion today HM. Will let you know re readings.

Hi HM, Thanks for your response. Voltage outputs on the keypad power wires? If they are low, is it a new alarm panel that is needed?

Hi All, We have had an Acenta G4 alarm fitted for 5 years. It has been fine until recently, however the keypad now appears to have failed. There are PIRS sensors, a door sensor and an alarm box with LEDs/siren. On the keypad, the 2 LED lights are not illuminated. The keypad does not...