Recent content by carlbhoy

I need to buy a new carb for my strimmer, searched everywhere online cannot find one, does anyone know of any places that sell them, or if there are any comparable ones?

Thanks blup

I need to replace my st9100a 1 day timer, would it be ok to replace with st9100c 7 day timer?

Thanks guys, guess I better get a new one, can anyone tell me what Honeywell model would fit the existing backing plate

Just felt the unit and down the left side the casing is rather warm

I have a Honeywell ST9100A installed in my airing cupboard, which works the underfloor heating, last night, as I lay in bed, I could hear a clicking noise, upon investigation it was coming from the Honeywell, the screen was also flashing on and off, any ideas?

Can anyone help/advise, only just started, when flushing upstairs toilet as it fills its making a horrible noise, i’ve read that changing the infill valve will solve this, but I put a new one on yesterday, and the problems persists, as it refilling, if I turn the sink cold water tap on, the...

A couple of years ago, my boiler (grant vortex eco) was serviced, while i was at work, and my wife said the engineer told her that the boiler need not be as hot as that and proceeded to turn something down, he also said if you find it does not get hot enough, call us back and we will alter it...

My toilet has just developed a leak at the isolated valve, which I installed a new one, and it was still leaking, on further examination I noticed the plastic thread coming out of the bottom of the cistern was split above the washer of the isolated, so I guess that’s why it still leaking out...

Hi, I want to change my Prv valve in my grant vortex eco wall mounted Combi boiler, as pressure keeps dropping, on undoing the valve would there be any water ready to come out if the pressure was on zero, if so would it be easy to contain ?. Would I have to turn off any water supply other than...

I recently had to top the pressure up on my grant vortex eco combi boiler, and when the boiler ignited, it dripped water out the bottom, only for a couple of minutes, and then it remained ok, I then had to top the pressure up once again and the same thing happened, it seems to leak immediately...

Yes I’ve removed the screw

Hi, I want to change cartridge in my bathroom tap, but I cannot remove the bonnet, I’ve tried with a strap wrench, to no avail, has anyone got any other ideas, thanks

So I have to get a complete new cartridge?