Removing tap bonnet

[carlbhoy]

Hi, I want to change cartridge in my bathroom tap, but I cannot remove the bonnet, I’ve tried with a strap wrench, to no avail, has anyone got any other ideas, thanks

 

[just pumps]

Pour boiling hot water over it first?

 

[BlueLoo]

Use an old innertube or rubber sheet to get grip.

 

[opps]

Photos might help.

 

[CBW]

Have you removed the retaining screw?

 

[carlbhoy]

 

[carlbhoy]

Yes I’ve removed the screw

 

[CBW]

Which bit are you calling the bonnet? The very top where the white identifier disc is, the retaining screw should be under that.

 

[CBW]

What are you using to remove it? Have you got a wide mouth adjustable spanner?

 

[BlueLoo]

You have to remove the cap first, then remove the handle, then undo the decorative bonnet to get to the valve.

Removing the handle can be a futile exercise.

Edit, didn't see the last photo.

 

[opps]

Looking at the cartridge, you need to use a spanner to remove the shroud.

https://www.bathroomspareparts.co.uk/heritage-1924-12-standard-valve-pair-15237xx08n-102845-p.asp