Recent content by Chris_TT

Thermo get some http://www.clarity.it/xcart/home.php?cat=255 or exterior grade cable run it to office problem solved. £15.75 for 30m with connectors and boots fitted both ends. Ask in electrics if you want to do it regs eg clip/bury etc. and dont forget to make it vermin proof.

hi all Toshiba laptop hardrive with about 37.5gig of data and winxp on shorted. I think my hardrive is cooked icon_sad.gif connected to a pc to back it up before doing anything . A bad smell of burning came from hd either the connector or cable shorted out icon_exclaim.gif . Can I replace...

hi all I think my hardrive is cooked :( connected to a pc to back it up before doing anything . New thread started here //www.diynot.com/forums/viewtopic.php?t=208933 Can you add your comments in hardware thanyou.

HNY all winxp lost 2gig free space . 1st lost 500mb leaving 1.5gig then lost another 500mb and another now down to 130mb whats eating my free space ? :S is it a virus or winxp ? help :(

dangermouse there are already 2 nnn markers i cant add a third and the are 10 faults f2 already . When a new f2 is added will it look the same ? I don't want to do a d96 factory reset to clear the codes there should be a short cut to clear the old codes.

Thankyou dangermouse The fault code memory is full now what happens when new faults are logged? Do i need to clear the memory to make room for new f codes and can i see what time date the f code happened ?

Thankyou dangermouse £215 for upto 3 ntc cables includes any other faults ? Are you a vaillant engineer ?

Thankyou Gasman28 Vaillant engineer only repair ? dangermouse how much is a fixed price repair ?

Gasman28 its a 824 turbomax plus f2 means ?

hi i have f 2 fault codes on vaillant turbo max plus f 2 is not listed on pdf instructions :?

A big thankyou to chrishutt , ChrisR and ollski for taking the time to help! :) time to call the man from vaillant :?

d25 = 1 warm start light off

d37=0 d37= 166 when hot tap turned on max, ranges from 95-166 when tap running and somes times drops to 0 with tap running d37= 105 when tap half open d37=8 room temp 22c? will try to check at 90 c ok trying d22 and d35 d22=0 d22=1 when hot tap on d35=0 d35=1 when hot tap on

pressed buttons i and + into diagnostics d24 = 0 . When hot water on d24 = 1 . Water luke warm/cold goes hot and back again. Is that the aps test ok ?

A corgi called to check gas valve 10-7mb when ' modulating' ? wants to replace parts until fixed starting with pcb,pump etc Sounds expensive second opinion needed ? Other corgis called not interested when told vailliant 824 say to call vaillant out ? Is there a max charge to fix fault...