Recent content by chrisdt1

that was parts asw well boilersrus was the name very good service engineer very good might even give up diy now

well had enough bout 10 this mornong when i blew up the control box called out an emergency plumber who fixed it all new control box fitted and original thermostat reinstated wht do plumbers who wire up these things not stick to traditional wiring instead of using any colour for live...

well i did the scotch block thin and it all worked blue seems to be live and brown and green in the block old stat 1432 right to left in that order

ill try that tomorrow thanks for your help i may be needing it again soon chris

its a honeywell t40 i think

would that be live and demand

ill give it a go tomorrow any ideas on the old thermostat wiring

it does click

c/h switch on control box is set for 24 hr and thermo is set at max no c/h it worked when the boiler was heating water very cofusing

no i dont really need to get one any ideas

could you tell me how to fix back my old thermostat at least it worked i didnt take note where the wires came off but no 1,3 and 2 screws are loose its a honey well thermostat

yes programmed to come on up to ten pm set thermostat to 25 degs it went off coincidentally when it had heated a tank of water. never had a prob before only changed thermstat because it would only turn on above 30 degs im a bit confused now dont know whats wrong withit

hope so ill see tomorrow its gone off now when i thought it would carry on seems it turned off when the hot water went off

thanks for the advice it is wired that way now and seems to work. radiators are warmong up. just confusing why when i first did it with wiring like this pump and boiler didnt fire up,when hot water was demanded it fired up!!! i then selected 24hr on timer for c/h will check c/h in...

hi need some advice on replacing ny room thermostat i changed the old one for a drayton rts 1 all wired up and only the hot water works, no c/h, thermostat clicks ive tried to wire it alll ways and blown 2 fuses in c/h switch box i need some advice before i call an electrician wire...