Recent content by cooden

Thanks for the replies, but the pdf is of the wrong model ( see pic above). I believe that I have the correct user manual download, but to my eyes it is not clear. It appears that the heating is on all the time but at a lower level and then the user can pick periods when the temp needs to be...

I thought that I had got it right with this Raychem TC thermostat but it still is not working -I think it is OK - it's me! What I need is a 'You tube' type video of someone programming the darn thing in the User Programming mode. Can anyone out there help? :? bill

Hi Swampy. Many thanks for that, I suspect you may be onto something as there is a YouTube demo of a similar unit, but there is no sound and the bloke does the setting really quickly, although it would seem that what you say is correct. It's my daughter's flat so not there at the moment.but will...

My new property (2006) has underfloor heating controlled by a Raychem TC timer thermostat. I have downloaded the user instructions, but to program it in the user mode (U1) is somewhat unclear as it says 'Select the desired time with the +/- buttons'. But it doesn't say the 'On' time or the 'Off'...

Everything

Just need a bit of advice! My Maxtor 3200 external hard drive is used as my principle back-up to my Vista PC. It all works fine. Trouble is I can't fathom out what is backed-up! Clicking on the maxtor I see the latest back-up icon. Click on that and I see a dozen other folders of previous...

Just to close this chain, i've had the base element out and it has seriously had it! Split wide open for about 20% of its length. New one on order! bill

It's me again! And if you could see me now you'd see me tucking into a big slice of humble pie! After scouring the Net I have found out that there is indeed a bottom heating element, well hidden by insulation and accessible only from the r/h side. I've found it but not taken it out yet, but if...

Again, much appreciated replies boys, but 'fraid there is NO bottom element (or side)! The model is a Henley 10585G if that's any help. The heat for the top oven Definately comes from the grill elements as its too hot to handle when the top oven is switched on - although not hot enough to heat...

thanks for the replies. The door seal is OK - checked. The thermostat is OK - checked by heating up the probe separately and seeing if it controled the top oven - and it did! The heat - what there is of it - for the top oven is coming from the grill element so there is no under-floor element. So...

Dontcha just love these inconclusive faults? My Cannon Henley duel-fuel top oven doesn't get hot enough (probably about 100C tops). The thermostat light stays on all the time if set above 100C, but does operate OK if set below this figure. All well-and-good - so it must be the element as the...

Hi peeps The electric top oven on my Cannon duel fuel doesn't get hot enough. It will struggle to get to about 110C but no higher. Is the fault with the thermostat (which seems to be working OK) or with the heating element? I know where the thermostat is, but where is the heating element? The...

I've got some rotten window sills that need to be replaced - not repaired, done that, it never works successfully. They're wooden casement windows about 25 years old on friction hinges so can be easily removed. How far does the sill extend under the window frame; is it attached to the inside...