Well thanks for thinking about my problem. The real problem is the instruction manual. I only found out how to clear the fault log by accident.
I have just written myself an instruction page on the 'Fault led' and battery changing. My memory is not very good, so an aide memoire will save...
I have managed to solve the problem. I went into the Fault log and deleted the reports one by one. I deleted them all expect the hall PIR which would not delete. So there was the culprit. Changed the battery and all restored to normal now.
The instruction book for this alarm is apalling.
Peter
The ‘Faulty display Led’ is illuminated on my Yale HSA6400 Alarm system and it beeps every 30 seconds. I assumed that there must be a low battery condition in one of the 5 PIRs or 2 door sensors. The only other devices on the system were two keyfobs but have removed them from the system. However...
Thanks for the further thoughts on this topic. Unfortunately my son has been working on his car's plumbing this week-end. A split hose to which access required the removal of the front bumper, the front panel containing the lights plus the radiator. :x :x However all back in place by Sunday...
I have recently helped my son install a new bathroom suite. The flow of hot water from the basin tap is however rather slow. He can live with it, as it is, but it would be nice if we could improve it. The hot water tank is fed from a header tank in the loft which is almost 2 metres above the...