Recent content by cross thread

  1. C

    Flush valve

    Infa red touch less flush
  2. C

    Soldering / "unsoldering" question ...

    If you don’t remove the water it wont unsolder
  3. C

    Help to Understand wiring diagram for ACL Lifestyle Wiring Centre LWC1

    No standard letters / numbers for connections,
  4. C

    Balanced Flue Gas Fire Question

    Ask them to gas rate it
  5. C

    Balanced Flue Gas Fire Question

    Get the installer back to check.some fires also have restrictors depending on flue run/ length
  6. C

    Can I reduce the moss build up on the north side of my roof ?

    I used a product by wet and forget with limited results,next year I will just get up and scrape it off.
  7. C

    Air Source Heat Pump – Building Control Inspection Checks

    That it’s all been signed off by a company with the relevant qualifications
  8. C

    Balanced Flue Gas Fire Question

    Starting point would be gas pressure check / gas rate.
  9. C

    Pull out tap lever in wrong position.

    Tap needs refitting ,it sounds like it needs swivelling to the right so mid position is central
  10. C

    Intergas system boiler w/ Mixergy Cylinder wired as PDHW (aka X-Plan)

    Contact Richard burrows at the intergas shop
  11. C

    Multiple Megaflows

    It would need looking at as it could be piped in various ways ,the cylinders notin use don’t want leaving with stagnant water in.
  12. C

    Low Hot Water Pressure

    Possibly had high pressure taps fitted to a low pressure system
  13. C

    PE-X Pipe in Central Heating system

    If you can get that in why can you get copper in ?
  14. C

    Filter cleaning?

    Only going of my experience having fitted a lot and cleaned them when servicing .
  15. C

    Filter cleaning?

    Quality filter you won’t have any trouble with the valve leaking. Remove cap ,it also fits the valve to turn on/ off.no need to drain anything the system pressure pushes any sediment out ,couple of seconds will do
See more
Back
Top