Recent content by cwrtcoed

It's been like this for weeks, nobody has touched the boiler. The boiler has its own storage at the base of the boiler, Worcester said the problem shouldn't be there. because there's nothing that can mix together so we are stumped. Hence why the manifold change

I know I was thinking about the contamination issue. I can Confirm that the loop fill has been disconnected. What other issue could it be if it's when the cold feed for the hot water is putting the pressure up? Only the manifolds are left, it's only costing £40 for the both manifolds cause he...

Hi Cold feed has been disconnected Yes cold feed for the hot water supply, sorry I only been watching what the plumber been doing. There was a slight kink in the flexi hose but it doesn't look totally blocked. Is there any other places where the feeds mix, he said that's the only thing he...

Norm set pressure to just over 1 bar, but soon as you open the cold feed it goes straight to 3 bar, if you turn the CH feed and return pipes on, the pressure is ok (without turning in the actual boiler on). Soon as you put cold feed via loop it more or less goes to 3 bar I think the PRV is...

hi I currently have a high pressure problem in my highflow 400 electronic boiler. It's running at 3 bar which triggers the PRV so I got constant dripping water ( and I'm on a water meter). Plumber has come up and he changed the expansion tank, but the next day pressure was back up. He's changed...

Trouble is Because the pipes have been taken out from the boiler I'm not sure which ones go where unless you got a diagram. Or I could just change it, don't want to get e new one because the property is up for sale. On another note I was thinking of moving the boiler upstairs into the...

I have a grant oil boiler version 2 model 70, and I am wondering where can I get replacement copper pipework for it? My rented house was burgled and they nicked all the pipework in the house and the piping from the boiler. Can you actually buy the proper pipework for it or can I just buy copper...

ok will have a look at that, how is the kerosene a slight red colour from the tank? can you get it a redy colour or is it just the rust in the tank re rich

to be honest i dont really know its a metal container, would it be underneath?

Hi new pump fitted and the oil is flowing out into the nozzle as a fine spray. I had to reset it a few times because the kerosene would not ignite and at first i was still having the white milky stuff through even after i cleaned it out. I'm not sure as to how the water got into the tank in...

Hi thanks for that, not sure as to how water got in there in the first place. I have cleaned the filters and pump which were absolutley caked. i have reconnected it back up but left the main exit flow pipe which feeds the nozzle off. i have then started the boiler up not in situ so i can see...

Hi this is my first post so be kind. I currently have a camray 5 oil burner which has had a new control box due to starting problems. After just two weeks the boiler is not starting again, i have removed the burner and dismantled the nozzle and elctrodes which were clean. i fired the boiler...