One last question, which would be the best all rounder between cm927 and single zone. Essentially i want to replace the timeer that i have in place + the thermostat. Im guessing the cm927.
Ta i guessed as much. I take it the cm927 is a thermostat + timer. Would it best asking a plumber to install or an electrician? I was reviewing some others, such as hive and nest. whats your opinon on those
Hi Dan, I'd guessed as much in all honesty the there is still about 3 meters of cable attached, so im not sure what the previous owners intention were
How difficult is the cm927 to install, bearing in mind this is the current istallation (see pics)
Hi I have recently moved into a new house and home and have a honeywell T6360 installed. Although the operation of the thermostat seems simple enough, it doesnt seem to be working correctly.
If i switch it to 15 degrees it turns off, however if i turn it on regrdless of temp set it doesnt seem...
so what would be the most efficient way to heat the house? if the boiler is on min and the TRV;'s on max the heat is acceptable in all rooms but the problem bedroom. When the boiler is on minimum i can hear when the gas comes on which is a lot less frequent than if the boiler is set to a higher...
Hi thanks for your reply. Its just luke warm. ive turned up the boiler to the highest temp and the bedroom radiator responds accordingly. Hence the question. Is it more cost effective to turn the boiler temp up, and reduce the rest of the TRV's
thanks
Hi all, i have a cold radiator in the main bedroom which is the furthest away from the boiler. Naturally this will be the coldest, as i have the boiler heat set to the minimum. Therefore is it more cost effective to have the boiler temperature higher(this will heat up the problem bedroom), and...