It has been a consideration. The gap is 30mm narrower than the desired gate, but I guess it's possible. I just wondered if it would look off, be insecure or attract attention due to looking like it has been messed with.
I need to widen my garden gate to accommodate a motorcycle. It is currently 750mm and I am looking to go up to 900mm.
My only problem is that the gap is too narrow and must be widened.
My first idea was simply take a 300mm saw, cut 150mm off the wall and reaffix the posts.
Idea two was get my...
I need to widen my garden gate to accommodate a motorcycle. It is currently 750mm and I am looking to go up to 900mm.
My only problem is that the gap is too narrow and must be widened.
My first idea was simply take a 300mm saw, cut 150mm off the wall and reaffix the posts.
Idea two was get my...
I did look at secondsandco but just ended up getting insulation from a local builders merchant called Beers. Good prices and they delivered for free because I am local to them. 8x4ft pir foiled board branded quinntherm were available for £27 per unit.
So I'm up to getting the ceiling insulated...
So you would suggest maybe insulation the dividing brick wall? It's certainly possible as I've thought of stripping the plaster coat from it which probably isn't in the best condition anyway, then batten insulate and board
Yeah I understand that the smaller wall (one with the corner) needs some more screws. Other one is ok though right? They are spaced at least every 300mm. Will be remedying the wall with a few more screws before the final fill.
I may have solved the issue. I think I might have to replace one of the boards, take a look at the edit I've made to my original post. Something on the floor slightly behind the room in the attic where the header tank is was blocking the board from going flush up to the brickwork. It was a...
Hi. I'm new to the forum. Looking to learn a bit on diy and share what I already know.
I have little experience in DIY but have decided to take on the task of fixing up my cave in the attic. After having a roofer replace an old skylight that was letting in water I'm now in the process of...