Recent content by David Margetts

I'm not that quick! I posted that image by way of a suggestion of the sort of thing I want to achieve. (From what I've seem on line, to bend plasterboard, you soak it with water for a few minutes on the outside surface then cut loads of tears/cuts in the other side to allow the plasterboard to...

I've removed an internal door and door frame between my kitchen and living room, and want to make the boring rectangular top into a tasteful arch. I know you can buy pre-formed wire mess forms to give the shape but wondered if anyone had any better ideas?

Well bless my soul! It darn tootin worked! You are my new hero! You should come on work on my stuff! Thank you so much and I will get a GS person in to check it out ASAP. Thank you so much. If you ever need any help fixing a medical linear accelerator - call me :-)

Your advice is much appreciated - I will stop messing with it but from a technical point of view, the way I have it set up, that clock is not used in any way. The clock pins are all set to do nothing and the switch is set to permanently 'ON' so that the external timer/thermostat does all the...

Hi Ian - I know I'm playing in other's 'sand pit' but I just can't help myself. (The systems I work on don't break down very often and I'm a compulsive 'fixer' :-) I used the original code plug to preserve the gas settings. Please find control panel attached. Once I work out what's wrong with...

Hi Ian. I tried shorting out LR & LS with the timer disconnected - nothing changed... Do you have any idea what you might expect to see across the various sensors that are scatter around? The user manual shows just a picture of them without giving any details on the expected resistance of logic...

Off home to try it now.... talk later

To gound I think... but should be the same?

Hi Ian - thanks for getting back to me - The timer is a cheap digital external type, but I've confirmed that the demand signal is getting to the boiler by monitoring the voltage on pin Lr of the circuit board interface and it goes to 240 VAC when the timer/thermostat calls for heat. Bur just to...

Hello - I've checked through the existing posts and there are a few that seem to refer to the same issues as I have but their solutions tend to be around the thermostat. I think my problems are not within the thermostat... My Worcester Greenstar 24i junior combi boiler doesn't heat the central...