Recent content by Dazman61

Thanks for all the informative replys and even the odd sarcastic one.....We can all learn something new everyday.

Thanks bernardgreen but could you clarify the wire in L1 on old switch becomes com on new switch and so on... many thanks

Hi all I want to change a double light switch which feeds 2 separate lights,the current switch plate has red and black wires connecting to L1 and L 2 on both switches but new switch plate has L1 and L2 and common on each switch... so swapped wires from old switch to new one using L1 and L2 but...

Thanks for the reply,have looked at how to replace part and looks fairly straight forward but have noticed a flexible pipe the goes from bottom of flow valve up to water tank that is held on with crimp clamps,not sure if this pulls away or cut crimps off and replace,got a photo of what I am...

After problems with my Mira advance atl I found out water is leaking from the air bleed button on top of the flow valve every time I run the cold water for a bath!!!!!!!!Does anyone know if this is repairable/replace part or is a new shower the easy answer,any feedback welcome and thanks in advance

Not solved this problem yet but now got another problem,when I run the cold water for a bath,water starts leaking from the electric shower,its a Mira advance atl and had the front cover off a found that the water is coming from the air bleed button on top of the flow valve,don't know if this...

Thanks for the reply,will give that a try,cheers

Hi all, just recently our water was turned off due to a leak in a nearby road and since it's been back on the pressure seems way to high compared to before,now every time I turn off a cold tap my shower spurts out water!!!!have turned down water slightly on indoor stopcock and run shower...

Thanks crank39 much appreciated, another job I can get done.Still can't upload photos from my phone !!!!

Warped end closures

Thanks for the reply crank39,sounds easy enough but what holds the end closers onto the poly panel?

Found out the pieces I am referring to are called end closures?and I am wondering if I can remove the old warped ones and replace with new ones without removing poly panels?can't seem to add photos, new to this site,thanks

Thanks for both replys,scratching my head now... Firstly got the right correct cable from a local elec shop,secondly have got an older style fuse box,found the sockets feed in box,didn't know if I could add the this feed for new socket or have a spare opening in fusebox and wondered if I could...

I am forward planning and want to put a double socket in the hallway,got the cable got the socket and box and have routed the cable through to the cupboard under the stairs where electrical box is situated, now is this a job I can tackle myself,I am quite competent with plenty of tools and...

Hi all,I was cleaning the poly roof panels on my conservatory and noticed that some of the strip's on the end of the panels that overhanging into the gutter have warped out of shape and one has come off the panel completely. Can I get new strips(sorry don't know proper name) and would they be...